The hardness of steel is governed by_________________?
Show answer Hide answer
Answer: B. the shape and distribution of the car-bides in iron
Explanation
The hardness of steel depends heavily on the microstructure specifically the morphology and distribution of carbides. Fine dispersions of cementite carbides within the iron matrix restrict dislocation movement and increase hardness. Heat treatment processes alter these carbide distributions to achieve desired mechanical properties in steel parts. Steel is an alloy composed primarily of iron and carbon along with various other trace alloying elements. Carbides are chemical compounds of carbon and transition metals such as iron carbide or cementite. Martensite is a supersaturated hard microstructure formed by rapid quenching of heated steel alloys.
Manufacturing cutting tools and industrial gears requires precise heat treatments to optimize carbide distribution. Metallurgical testing measures steel hardness using Rockwell or Brinell indentation test procedures. Structural steels balance hardness and toughness by controlling carbon content and microstructure formation. Option A is incomplete because total carbon content alone does not determine hardness without microstructural context. Option C describes manufacturing methods which influence properties through their effect on microstructure. Option D and E are secondary factors that affect steel behavior but are secondary to carbide morphology.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Raw coal must undergo this process prior to combustion____________________?
Show answer Hide answer
Answer: C. heated to its ignition point
Raw coal must be heated up to its ignition point before sustained combustion can take place. Reaching this thermal threshold initiates rapid exothermic oxidation of the carbon and volatile matter. Without reaching igniti...
Q2. Lower bainite (tempered martensite) exhibits a hardness of roughly________________?
Show answer Hide answer
Answer: C. RC 57
Lower bainite forms through isothermal transformation at moderate elevated steel cooling temperatures. Microscopic carbide precipitation within ferrite needles provides substantial strengthening and hardness. Standard me...
Q3. At extremely high pressures, the viscosity of most gases and liquids__________________?
Show answer Hide answer
Answer: D. shows erratic behavior
At extremely high pressures, molecular spacing decreases significantly, causing real gases and liquids to exhibit erratic and non-ideal viscosity behavior. High compression forces crowd molecules so closely together that...
Q4. A grey body is defined as one where absorptivity_________________?
Show answer Hide answer
Answer: C. is equal to its emissivity
By definition, a grey body has an absorptivity that equals its emissivity across all conditions. Its radiative properties remain constant and do not vary with wavelength or temperature changes. This idealized engineering...
Q5. Boiler fusible plugs are made of a low-melting alloy comprising tin, lead, and___________________?
Show answer Hide answer
Answer: A. bismuth
Boiler fusible plugs utilize low melting point ternary metal alloys for emergency safety. Bismuth combines with tin and lead to depress the alloy melting temperature significantly. Excessive boiler temperatures melt the...
Q6. A steam pipe is insulated using two concentric layers of different insulating materials. For optimal performance__________________?
Show answer Hide answer
Answer: A. better insulation should be put over pipe and better one over it
To minimize heat loss effectively through multiple insulation layers, the material with better insulating properties should be placed on the outside where the radius is larger. Placing the superior insulating material on...