Boiler fusible plugs are made of a low-melting alloy comprising tin, lead, and___________________?
Show answer Hide answer
Answer: A. bismuth
Explanation
Boiler fusible plugs utilize low melting point ternary metal alloys for emergency safety. Bismuth combines with tin and lead to depress the alloy melting temperature significantly. Excessive boiler temperatures melt the plug, releasing steam to warn operators of danger. Low melting alloys undergo phase changes at temperatures well below standard engineering metals. Boiler safety devices must operate reliably during low water level overheating emergencies. Metallurgical phase diagrams help engineers formulate eutectic alloys with precise melting points.
Steam power plants install fusible plugs as a vital final line of defense against explosions. Regular safety inspections ensure boiler plugs are free of scale and oxidation deposits. Thermal safety devices protect expensive industrial pressure vessels from catastrophic catastrophic failure. Option B copper is a high melting point metal used for electrical wiring and heat exchangers. Option C aluminum provides lightweight structural strength rather than low melting safety properties. Option D nickel increases high temperature corrosion resistance in specialized alloy steels.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Gusset stays inside a boiler serve to____________________?
Show answer Hide answer
Answer: A. prevent the bulging of flat surfaces
Gusset stays are heavy plate brackets welded or riveted internally to reinforce vulnerable flat boiler surfaces. Internal pressure exerts massive outward forces on flat boiler walls, causing them to bulge outward dangero...
Q2. The hardness of steel is governed by_________________?
Show answer Hide answer
Answer: B. the shape and distribution of the car-bides in iron
The hardness of steel depends heavily on the microstructure specifically the morphology and distribution of carbides. Fine dispersions of cementite carbides within the iron matrix restrict dislocation movement and increa...
Q3. A thermally transparent body reflects 40% of incident radiant energy. Given a transmissivity of 0.15, its surface emissivity is____________________?
Show answer Hide answer
Answer: A. 0.45
Radiation energy balance requires the sum of reflectivity, transmissivity, and absorptivity to equal exactly one. Subtracting the 40 percent reflectivity and 15 percent transmissivity leaves an absorptivity of 45 percent...
Q4. Kirchhoff’s law dictates that______________________?
Show answer Hide answer
Answer: E. ratio of emissive power to absorptive power for all bodies is same and is equal to the emissive power of a perfectly black body
Kirchhoff's law states that any body's ratio of emissive power to absorptivity equals a black body's emissive power. This fundamental radiation law applies at any given thermal equilibrium temperature for all radiating s...
Q5. A floating body achieves stable equilibrium when its metacentre is situated___________________?
Show answer Hide answer
Answer: E. above the center of gravity
A floating body is in stable equilibrium when its metacentre is located vertically above its center of gravity. This favorable geometric alignment creates a restoring righting moment whenever the body is tilted. If the m...
Q6. The free liquid surface acts like a membrane and tends to shrink to minimum area due to_________________?
Show answer Hide answer
Answer: B. force of cohesion
Cohesive forces act between identical liquid molecules, pulling them inward and minimizing the exposed surface area. This molecular attraction creates an inward pressure that forces liquid droplets to form spherical shap...