Skip to main content
Sarkari MCQs Government Exam Question Bank
Menu
Question no. 57174

A floating body achieves stable equilibrium when its metacentre is situated___________________?

Select your answer for: A floating body achieves stable equilibrium when its metacentre is situated___________________?
Show answer

Answer: E. above the center of gravity

Explanation

A floating body is in stable equilibrium when its metacentre is located vertically above its center of gravity. This favorable geometric alignment creates a restoring righting moment whenever the body is tilted. If the metacentre falls below the center of gravity any tilt produces an overturning moment instead. Buoyancy is the upward force exerted by a fluid that opposes the weight of an immersed object. Center of gravity is the point where the entire gravitational weight of the floating body acts downward. Metacentre is the theoretical point about which a floating body oscillates when tilted by external forces.

Option A causes an overturning moment when tilted resulting in unstable equilibrium and vessel capsizing. Option B is incorrect because stability depends on the metacentre position relative to the center of gravity. Option C describes buoyancy center locations which do not determine stability without the metacentre.

Subject
Engineering
Topic
—
Difficulty
medium

Related questions

Q1. A grey body is defined as one where absorptivity_________________?

Select your answer for: A grey body is defined as one where absorptivity_________________?
Show answer

Answer: C. is equal to its emissivity

By definition, a grey body has an absorptivity that equals its emissivity across all conditions. Its radiative properties remain constant and do not vary with wavelength or temperature changes. This idealized engineering...

Q2. Boiler fusible plugs are made of a low-melting alloy comprising tin, lead, and___________________?

Select your answer for: Boiler fusible plugs are made of a low-melting alloy comprising tin, lead, and___________________?
Show answer

Answer: A. bismuth

Boiler fusible plugs utilize low melting point ternary metal alloys for emergency safety. Bismuth combines with tin and lead to depress the alloy melting temperature significantly. Excessive boiler temperatures melt the...

Q3. A steam pipe is insulated using two concentric layers of different insulating materials. For optimal performance__________________?

Select your answer for: A steam pipe is insulated using two concentric layers of different insulating materials. For optimal performance__________________?
Show answer

Answer: A. better insulation should be put over pipe and better one over it

To minimize heat loss effectively through multiple insulation layers, the material with better insulating properties should be placed on the outside where the radius is larger. Placing the superior insulating material on...

Q4. Grey cast iron is characterized by_____________________?

Select your answer for: Grey cast iron is characterized by_____________________?
Show answer

Answer: A. contains 1.7 to 3.5% carbon in free state and is obtained by the slow cooling of molten cast iron

Grey cast iron contains 1.7 to 3.5% free graphite flakes formed during slow cooling of molten metal. These graphite flakes give the fractured metal a characteristic grey appearance and dampen vibrations well. Slow coolin...

Q5. A rising temperature of flue gases entering the chimney at constant steam output indicates__________________?

Select your answer for: A rising temperature of flue gases entering the chimney at constant steam output indicates__________________?
Show answer

Answer: C. fouling of heat transfer surfaces

Fouling layers act as thermal insulators on boiler heat transfer tube surfaces. Insulating deposits prevent heat from transferring effectively into the circulating boiler water. Consequently, waste heat escapes up the ch...

Q6. Hard coke is manufactured through the carbonization of coal at_______________?

Select your answer for: Hard coke is manufactured through the carbonization of coal at_______________?
Show answer

Answer: D. 95O-1100°C

Hard coke is produced by high-temperature carbonization of coal in the range of 950 degrees Celsius to 1100 degrees Celsius. Heating coal in the absence of oxygen drives off volatile hydrocarbon gases, leaving behind a s...

New!

Mock Test System is now available!

Prepare for your exam with interactive mock tests. Select your subjects, attempt 100 random MCQs against the clock, and see exactly where you stand.

Start Mock Test