Grey cast iron is characterized by_____________________?
Show answer Hide answer
Answer: A. contains 1.7 to 3.5% carbon in free state and is obtained by the slow cooling of molten cast iron
Explanation
Grey cast iron contains 1.7 to 3.5% free graphite flakes formed during slow cooling of molten metal. These graphite flakes give the fractured metal a characteristic grey appearance and dampen vibrations well. Slow cooling allows carbon to precipitate out as free graphite rather than forming iron carbide. Cast iron is an iron-carbon alloy group with carbon content generally exceeding two percent. Metallurgical cooling rates dictate whether carbon precipitates as graphite flakes or stays combined as cementite. Grey cast iron is widely used due to its excellent fluidity during casting and high machinability.
Automotive engine blocks and machine tool frames are manufactured from grey cast iron for damping vibrations. Foundries produce grey cast iron components easily because the graphite flakes lubricate cutting tool edges. Structural applications benefit from the compressive strength and wear resistance of grey cast iron. Chilled cast iron is rapidly cooled to form hard, unmachinable iron carbide rather than free graphite flakes. Annealed malleable cast iron is produced through prolonged heat treatment rather than slow liquid cooling. Nodular cast iron contains magnesium additions that force graphite into spheroidal nodules instead of flakes.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. A steam pipe is insulated using two concentric layers of different insulating materials. For optimal performance__________________?
Show answer Hide answer
Answer: A. better insulation should be put over pipe and better one over it
To minimize heat loss effectively through multiple insulation layers, the material with better insulating properties should be placed on the outside where the radius is larger. Placing the superior insulating material on...
Q2. Kirchhoff’s law dictates that______________________?
Show answer Hide answer
Answer: E. ratio of emissive power to absorptive power for all bodies is same and is equal to the emissive power of a perfectly black body
Kirchhoff's law states that any body's ratio of emissive power to absorptivity equals a black body's emissive power. This fundamental radiation law applies at any given thermal equilibrium temperature for all radiating s...
Q3. A floating body achieves stable equilibrium when its metacentre is situated___________________?
Show answer Hide answer
Answer: E. above the center of gravity
A floating body is in stable equilibrium when its metacentre is located vertically above its center of gravity. This favorable geometric alignment creates a restoring righting moment whenever the body is tilted. If the m...
Q4. Hard coke is manufactured through the carbonization of coal at_______________?
Show answer Hide answer
Answer: D. 95O-1100°C
Hard coke is produced by high-temperature carbonization of coal in the range of 950 degrees Celsius to 1100 degrees Celsius. Heating coal in the absence of oxygen drives off volatile hydrocarbon gases, leaving behind a s...
Q5. During low-speed operation or engine idling, petrol engines require_______________?
Show answer Hide answer
Answer: C. rich mixture
Petrol engines operating at low speeds or idling suffer from low intake manifold velocities and poor fuel vaporization. A rich mixture containing extra fuel ensures that enough combustible vapor reaches the spark plug fo...
Q6. The Stefan-Boltzmann law states that ideal radiators emit thermal radiation at a rate proportional to___________________?
Show answer Hide answer
Answer: C. fourth power of absolute temperature
The Stefan-Boltzmann law dictates that thermal radiation emitted by a black body is proportional to the fourth power. This fundamental radiation law applies directly to ideal black body radiators operating at absolute te...