Hard coke is manufactured through the carbonization of coal at_______________?
Show answer Hide answer
Answer: D. 95O-1100°C
Explanation
Hard coke is produced by high-temperature carbonization of coal in the range of 950 degrees Celsius to 1100 degrees Celsius. Heating coal in the absence of oxygen drives off volatile hydrocarbon gases, leaving behind a strong porous carbon matrix. This high-temperature coking process fuses the carbon structure, creating the dense mechanical strength required for blast furnaces. Carbonization is the destructive distillation of organic matter inside large refractory-lined industrial coke ovens. Temperatures below nine hundred degrees yield softer, reactive chars rather than the dense hard coke needed for metallurgy. Byproduct gases released during the coking process are captured and used as fuel gas for heating the ovens.
Atmospheric temperature carbonization is impossible because thermal decomposition of coal requires intense external heat. Temperatures between five hundred and six hundred degrees Celsius produce semi-coke or low-temperature coal tars. Operating ranges between twelve hundred and fifteen hundred degrees Celsius exceed standard coking oven design limits.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. A floating body achieves stable equilibrium when its metacentre is situated___________________?
Show answer Hide answer
Answer: E. above the center of gravity
A floating body is in stable equilibrium when its metacentre is located vertically above its center of gravity. This favorable geometric alignment creates a restoring righting moment whenever the body is tilted. If the m...
Q2. The free liquid surface acts like a membrane and tends to shrink to minimum area due to_________________?
Show answer Hide answer
Answer: B. force of cohesion
Cohesive forces act between identical liquid molecules, pulling them inward and minimizing the exposed surface area. This molecular attraction creates an inward pressure that forces liquid droplets to form spherical shap...
Q3. Grey cast iron is characterized by_____________________?
Show answer Hide answer
Answer: A. contains 1.7 to 3.5% carbon in free state and is obtained by the slow cooling of molten cast iron
Grey cast iron contains 1.7 to 3.5% free graphite flakes formed during slow cooling of molten metal. These graphite flakes give the fractured metal a characteristic grey appearance and dampen vibrations well. Slow coolin...
Q4. The Stefan-Boltzmann law states that ideal radiators emit thermal radiation at a rate proportional to___________________?
Show answer Hide answer
Answer: C. fourth power of absolute temperature
The Stefan-Boltzmann law dictates that thermal radiation emitted by a black body is proportional to the fourth power. This fundamental radiation law applies directly to ideal black body radiators operating at absolute te...
Q5. An ideal black body is described as one that_______________?
Show answer Hide answer
Answer: D. abslprbs heat radiations of all wave lengths falling on it
An ideal black body absorbs one hundred percent of all incident thermal radiation across every possible wavelength. It neither reflects nor transmits any incoming electromagnetic radiation, making it a perfect radiative...
Q6. A grey body is characterized by an absorptivity that _________________?
Show answer Hide answer
Answer: D. does not vary with temperature and wave length of the incident ray
Gray bodies possess optical properties that do not vary across different radiation wavelengths. Their absorptivity and emissivity remain completely independent of operating temperatures and incident ray frequencies. This...