A thermally transparent body reflects 40% of incident radiant energy. Given a transmissivity of 0.15, its surface emissivity is____________________?
Show answer Hide answer
Answer: A. 0.45
Explanation
Radiation energy balance requires the sum of reflectivity, transmissivity, and absorptivity to equal exactly one. Subtracting the 40 percent reflectivity and 15 percent transmissivity leaves an absorptivity of 45 percent. For opaque or gray bodies in thermal equilibrium, surface emissivity numerically equals its total absorptivity coefficient. Radiation striking a transparent surface is partially reflected, partially transmitted, and partially absorbed. Kirchhoff's law states that a body's emissivity at a given temperature equals its absorptivity for radiation from that source. Conservation of energy principles dictate that incident radiation fractions must account for all incoming thermal energy.
Thermal insulation design requires careful analysis of radiation properties to minimize unwanted heat transmission. Greenhouse effect mechanisms rely on materials with high solar transmissivity and low infrared emissivity. Calculating radiative heat transfer in furnaces depends on accurate surface emissivity and reflectivity values. Values like 0.55 or 0.75 result from arithmetic errors when summing the radiation property fractions. An emissivity of 0.40 ignores the transmissivity term and incorrectly equates emissivity directly to reflectivity. Arbitrary high values violate the fundamental conservation law where total radiation fractions must sum to one.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Lower bainite (tempered martensite) exhibits a hardness of roughly________________?
Show answer Hide answer
Answer: C. RC 57
Lower bainite forms through isothermal transformation at moderate elevated steel cooling temperatures. Microscopic carbide precipitation within ferrite needles provides substantial strengthening and hardness. Standard me...
Q2. At extremely high pressures, the viscosity of most gases and liquids__________________?
Show answer Hide answer
Answer: D. shows erratic behavior
At extremely high pressures, molecular spacing decreases significantly, causing real gases and liquids to exhibit erratic and non-ideal viscosity behavior. High compression forces crowd molecules so closely together that...
Q3. Gusset stays inside a boiler serve to____________________?
Show answer Hide answer
Answer: A. prevent the bulging of flat surfaces
Gusset stays are heavy plate brackets welded or riveted internally to reinforce vulnerable flat boiler surfaces. Internal pressure exerts massive outward forces on flat boiler walls, causing them to bulge outward dangero...
Q4. Boiler fusible plugs are made of a low-melting alloy comprising tin, lead, and___________________?
Show answer Hide answer
Answer: A. bismuth
Boiler fusible plugs utilize low melting point ternary metal alloys for emergency safety. Bismuth combines with tin and lead to depress the alloy melting temperature significantly. Excessive boiler temperatures melt the...
Q5. A steam pipe is insulated using two concentric layers of different insulating materials. For optimal performance__________________?
Show answer Hide answer
Answer: A. better insulation should be put over pipe and better one over it
To minimize heat loss effectively through multiple insulation layers, the material with better insulating properties should be placed on the outside where the radius is larger. Placing the superior insulating material on...
Q6. Kirchhoff’s law dictates that______________________?
Show answer Hide answer
Answer: E. ratio of emissive power to absorptive power for all bodies is same and is equal to the emissive power of a perfectly black body
Kirchhoff's law states that any body's ratio of emissive power to absorptivity equals a black body's emissive power. This fundamental radiation law applies at any given thermal equilibrium temperature for all radiating s...