At extremely high pressures, the viscosity of most gases and liquids__________________?
Show answer Hide answer
Answer: D. shows erratic behavior
Explanation
At extremely high pressures, molecular spacing decreases significantly, causing real gases and liquids to exhibit erratic and non-ideal viscosity behavior. High compression forces crowd molecules so closely together that intermolecular forces and molecular volume significantly alter fluid flow. Unlike standard conditions where viscosity changes predictably, extreme pressure regimes produce anomalous peaks and fluctuations. Viscosity measures internal fluid friction, typically increasing with pressure in liquids and decreasing or remaining steady in low-pressure gases. Real fluid behavior deviates markedly from ideal kinetic theory models when molecules are subjected to massive compressive stress. High-pressure viscometry experiments are required to map out these complex and unpredictable fluid property changes.
Stating that viscosity remains the same ignores well-documented molecular compression effects at extreme pressures. Claiming a simple steady increase for all gases and liquids overlooks the erratic fluctuations observed in real dense fluids. Predictable linear decreases fail to occur when intermolecular repulsion forces dominate under intense high-pressure conditions.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Expanding steam down to an extremely low pressure (high vacuum) within steam engines is_________________?
Show answer Hide answer
Answer: E. uneconomical
Expanding steam to extremely high vacuums increases equipment size and condensation losses disproportionately. The specific volume of steam increases exponentially at very low pressures requiring massive low-pressure cyl...
Q2. Gradually varied flow is characterized as__________________?
Show answer Hide answer
Answer: D. steady non-uniform
Gradually varied flow maintains steady discharge conditions while water depth changes slowly along the open channel length. Steady flow implies no temporal variations, while non-uniform flow indicates spatial depth chang...
Q3. Raw coal must undergo this process prior to combustion____________________?
Show answer Hide answer
Answer: C. heated to its ignition point
Raw coal must be heated up to its ignition point before sustained combustion can take place. Reaching this thermal threshold initiates rapid exothermic oxidation of the carbon and volatile matter. Without reaching igniti...
Q4. The hardness of steel is governed by_________________?
Show answer Hide answer
Answer: B. the shape and distribution of the car-bides in iron
The hardness of steel depends heavily on the microstructure specifically the morphology and distribution of carbides. Fine dispersions of cementite carbides within the iron matrix restrict dislocation movement and increa...
Q5. A thermally transparent body reflects 40% of incident radiant energy. Given a transmissivity of 0.15, its surface emissivity is____________________?
Show answer Hide answer
Answer: A. 0.45
Radiation energy balance requires the sum of reflectivity, transmissivity, and absorptivity to equal exactly one. Subtracting the 40 percent reflectivity and 15 percent transmissivity leaves an absorptivity of 45 percent...
Q6. A grey body is defined as one where absorptivity_________________?
Show answer Hide answer
Answer: C. is equal to its emissivity
By definition, a grey body has an absorptivity that equals its emissivity across all conditions. Its radiative properties remain constant and do not vary with wavelength or temperature changes. This idealized engineering...