Skip to main content
Sarkari MCQs Government Exam Question Bank
Menu
Question no. 57164

Raw coal must undergo this process prior to combustion____________________?

Select your answer for: Raw coal must undergo this process prior to combustion____________________?
Show answer

Answer: C. heated to its ignition point

Explanation

Raw coal must be heated up to its ignition point before sustained combustion can take place. Reaching this thermal threshold initiates rapid exothermic oxidation of the carbon and volatile matter. Without reaching ignition temperature, the fuel will absorb heat without releasing energy continuously. Combustion is a high-temperature exothermic chemical reaction between fuel and an oxidant like oxygen. Coal contains fixed carbon, moisture, ash, and volatile gases that release energy when burned. Furnace burners supply initial thermal energy to bring incoming fuel up to its required ignition threshold.

Power plant boiler operators monitor furnace temperatures to ensure stable ignition of pulverized coal streams. Industrial combustion systems require careful air-fuel mixing and ignition temperature control to prevent flameouts. Unburnt fuel losses occur if coal particles pass through the combustion zone without reaching ignition. Simply heating sufficiently is too vague compared to reaching the precise chemical ignition point. Burning in excess air ensures complete combustion but does not replace the requirement for ignition heating. Burning as powder or lumps describes physical preparation methods rather than the thermal ignition step.

Subject
Engineering
Topic
—
Difficulty
medium

Related questions

Q1. Free cutting steels are known for_____________________?

Select your answer for: Free cutting steels are known for_____________________?
Show answer

Answer: A. are used where ease in machining is the criterion

Free-cutting steels are specially alloyed with elements like sulfur or lead to improve machinability and chip breaking. These additive inclusions create microscopic discontinuities in the steel matrix that cause metal ch...

Q2. An increase in back pressure will cause fuel consumption to________________?

Select your answer for: An increase in back pressure will cause fuel consumption to________________?
Show answer

Answer: A. increase

An increase in exhaust back pressure restricts the smooth expulsion of combustion gases from the engine cylinder. Residual trapped exhaust gases dilute the incoming fresh air-fuel charge, reducing volumetric efficiency a...

Q3. Expanding steam down to an extremely low pressure (high vacuum) within steam engines is_________________?

Select your answer for: Expanding steam down to an extremely low pressure (high vacuum) within steam engines is_________________?
Show answer

Answer: E. uneconomical

Expanding steam to extremely high vacuums increases equipment size and condensation losses disproportionately. The specific volume of steam increases exponentially at very low pressures requiring massive low-pressure cyl...

Q4. At extremely high pressures, the viscosity of most gases and liquids__________________?

Select your answer for: At extremely high pressures, the viscosity of most gases and liquids__________________?
Show answer

Answer: D. shows erratic behavior

At extremely high pressures, molecular spacing decreases significantly, causing real gases and liquids to exhibit erratic and non-ideal viscosity behavior. High compression forces crowd molecules so closely together that...

Q5. Gusset stays inside a boiler serve to____________________?

Select your answer for: Gusset stays inside a boiler serve to____________________?
Show answer

Answer: A. prevent the bulging of flat surfaces

Gusset stays are heavy plate brackets welded or riveted internally to reinforce vulnerable flat boiler surfaces. Internal pressure exerts massive outward forces on flat boiler walls, causing them to bulge outward dangero...

Q6. The hardness of steel is governed by_________________?

Select your answer for: The hardness of steel is governed by_________________?
Show answer

Answer: B. the shape and distribution of the car-bides in iron

The hardness of steel depends heavily on the microstructure specifically the morphology and distribution of carbides. Fine dispersions of cementite carbides within the iron matrix restrict dislocation movement and increa...

New!

Mock Test System is now available!

Prepare for your exam with interactive mock tests. Select your subjects, attempt 100 random MCQs against the clock, and see exactly where you stand.

Start Mock Test