Skip to main content
Sarkari MCQs Government Exam Question Bank
Menu
Question no. 57161

An increase in back pressure will cause fuel consumption to________________?

Select your answer for: An increase in back pressure will cause fuel consumption to________________?
Show answer

Answer: A. increase

Explanation

An increase in exhaust back pressure restricts the smooth expulsion of combustion gases from the engine cylinder. Residual trapped exhaust gases dilute the incoming fresh air-fuel charge, reducing volumetric efficiency and power output. To maintain desired power levels under high back pressure, the engine must consume more fuel. Back pressure refers to the pressure resistance encountered by exhaust gases exiting an engine or turbine system. Exhaust systems include mufflers, catalytic converters, and turbocharger turbines that inherently create some flow restriction. Engine thermal efficiency depends on achieving a high expansion ratio during the power stroke cycle.

Fuel consumption increasing is the correct outcome, making a decrease an opposite and erroneous selection. Remaining unaffected ignores the thermodynamic reality that pumping losses degrade overall engine efficiency. Depending on other factors is overly vague because back pressure has a reliably detrimental effect on fuel usage.

Subject
Engineering
Topic
—
Difficulty
medium

Related questions

Q1. Under sub-atmospheric pressures, water exhibits___________________?

Select your answer for: Under sub-atmospheric pressures, water exhibits___________________?
Show answer

Answer: A. melting point rises slightly and boiling point drops markedly

Lowering ambient pressure drastically reduces the boiling point of water due to reduced vapor pressure requirements. The melting point of water increases very slightly under sub-atmospheric pressures because ice expands...

Q2. For dynamic similarity, besides geometric resemblance between model and prototype, this parameter must also match____________________?

Select your answer for: For dynamic similarity, besides geometric resemblance between model and prototype, this parameter must also match____________________?
Show answer

Answer: D. all the four ratios of inertial force to force due to viscosity, gravitation, sur-face tension, and elasticity

Dynamic similarity requires matching geometric resemblance and all relevant dimensionless force ratios simultaneously. Inertial forces must scale proportionally with viscous, gravitational, surface tension, and elastic f...

Q3. Compared to a four-stroke engine of matching size and weight, a two-stroke engine produces power output that is_________________?

Select your answer for: Compared to a four-stroke engine of matching size and weight, a two-stroke engine produces power output that is_________________?
Show answer

Answer: D. about 1.7 times

A two-stroke engine completes a power stroke during every single crankshaft revolution. This frequent firing frequency boosts power delivery compared to standard four-stroke engine designs. Scavenging limits and mechanic...

Q4. Gradually varied flow is characterized as__________________?

Select your answer for: Gradually varied flow is characterized as__________________?
Show answer

Answer: D. steady non-uniform

Gradually varied flow maintains steady discharge conditions while water depth changes slowly along the open channel length. Steady flow implies no temporal variations, while non-uniform flow indicates spatial depth chang...

Q5. Raw coal must undergo this process prior to combustion____________________?

Select your answer for: Raw coal must undergo this process prior to combustion____________________?
Show answer

Answer: C. heated to its ignition point

Raw coal must be heated up to its ignition point before sustained combustion can take place. Reaching this thermal threshold initiates rapid exothermic oxidation of the carbon and volatile matter. Without reaching igniti...

Q6. Lower bainite (tempered martensite) exhibits a hardness of roughly________________?

Select your answer for: Lower bainite (tempered martensite) exhibits a hardness of roughly________________?
Show answer

Answer: C. RC 57

Lower bainite forms through isothermal transformation at moderate elevated steel cooling temperatures. Microscopic carbide precipitation within ferrite needles provides substantial strengthening and hardness. Standard me...

New!

Mock Test System is now available!

Prepare for your exam with interactive mock tests. Select your subjects, attempt 100 random MCQs against the clock, and see exactly where you stand.

Start Mock Test