Skip to main content
Sarkari MCQs Government Exam Question Bank
Menu
Question no. 56994

Engine connecting rods are predominantly fabricated from_________________?

Select your answer for: Engine connecting rods are predominantly fabricated from_________________?
Show answer

Answer: C. medium carbon steel

Explanation

Engine connecting rods require high tensile strength and toughness, typically achieved using medium carbon steels. Medium carbon steels provide an optimal balance of ductility, hardness, and fatigue resistance under load. Forging medium carbon steel blanks ensures the directional grain flow needed for high cyclic stress. Connecting rods experience severe alternating tension and compression forces during every engine cycle. Heat treatment processes like quenching and tempering optimize the mechanical properties of carbon steels. Alternative materials like titanium or aluminum are reserved for specialized high-performance racing engines.

Automotive and industrial engine manufacturers rely on forged steel connecting rods for long-term reliability. Quality control testing ensures connecting rods can withstand millions of high-RPM load cycles. Selecting appropriate alloy compositions prevents premature fatigue failure in heavy-duty diesel engines. Option A aluminum is too light and lacks the fatigue strength needed for standard heavy-duty rods. Option B low carbon steel lacks sufficient tensile strength to handle severe reciprocating loads. Option D high carbon steel is too brittle and prone to cracking under severe cyclic impacts.

Subject
Engineering
Topic
—
Difficulty
medium

Related questions

Q1. The circulating working medium utilized within closed air turbines is___________________?

Select your answer for: The circulating working medium utilized within closed air turbines is___________________?
Show answer

Answer: C. in a single phase

Closed-cycle air turbines rely on a working fluid that stays in a gaseous phase throughout operation. Air does not undergo phase change inside the closed loop of this specific thermodynamic power cycle. Maintaining a sin...

Q2. Practical volumetric efficiencies for industrial air compressors typically run on the order of________________?

Select your answer for: Practical volumetric efficiencies for industrial air compressors typically run on the order of________________?
Show answer

Answer: D. 70-90%

Industrial reciprocating air compressors experience unavoidable losses like clearance expansion. Valve throttling and heat transfer further reduce the ideal intake air volume. Practical operating efficiencies for well-ma...

Q3. Water injection is integrated into gas turbine cycles in order to___________________?

Select your answer for: Water injection is integrated into gas turbine cycles in order to___________________?
Show answer

Answer: B. control output of turbine

Water injection into gas turbines is utilized to increase mass flow and control or boost the power output of the turbine. Injecting liquid water into the combustion chamber or compressor discharge causes it to flash into...

Q4. Gas turbine work ratios can be enhanced through____________________?

Select your answer for: Gas turbine work ratios can be enhanced through____________________?
Show answer

Answer: E. A. and C. above

The work ratio of a gas turbine measures net work output divided by the total positive work produced by the turbine. Decreasing the work required for compression leaves more net power available for external mechanical wo...

Q5. The work ratio of a gas turbine system represents the proportion of______________________?

Select your answer for: The work ratio of a gas turbine system represents the proportion of______________________?
Show answer

Answer: A. net work output and work done by turbine

The work ratio is mathematically defined as the net work output divided by the total turbine work. Compressor work must be subtracted from turbine gross work to determine the net useful output. This ratio highlights the...

Q6. Turbojet propulsion powerplants are capable of utilizing which fuel varieties _____________________?

Select your answer for: Turbojet propulsion powerplants are capable of utilizing which fuel varieties _____________________?
Show answer

Answer: C. kerosene

Turbojets require specialized liquid hydrocarbon fuels with high energy density. Kerosene provides the optimal balance of viscosity, volatility, and freezing point. Refined kerosene fractions meet all military and civil...

New!

Mock Test System is now available!

Prepare for your exam with interactive mock tests. Select your subjects, attempt 100 random MCQs against the clock, and see exactly where you stand.

Start Mock Test