How does specific output per kg mass flow in a gas turbine (assuming fixed component efficiencies and temperature limits) respond to increasing pressure ratios___________________?
Show answer Hide answer
Answer: D. first increase, reach maximum and then decrease
Explanation
As the pressure ratio increases in a gas turbine the specific work output initially rises and peaks. Further increases in pressure ratio cause compressor work requirements to grow faster than turbine power gains. This thermodynamic tradeoff results in a distinct optimal pressure ratio that maximizes specific power output. Gas turbine specific work depends on the net difference between turbine expansion work and compressor input work. Higher pressure ratios raise compressor exit temperatures and reduce the heat added in the combustion chamber. Thermodynamic cycle analysis uses specific heat ratios and temperature limits to calculate optimal performance curves.
Option A is incorrect because specific output eventually decreases after passing the maximum optimal point. Option B is wrong as the initial increase occurs at a rapid rate before slowing down near the peak. Option C is inaccurate because output increases significantly during the initial stages of pressure ratio growth.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Practical volumetric efficiencies for industrial air compressors typically run on the order of________________?
Show answer Hide answer
Answer: D. 70-90%
Industrial reciprocating air compressors experience unavoidable losses like clearance expansion. Valve throttling and heat transfer further reduce the ideal intake air volume. Practical operating efficiencies for well-ma...
Q2. Water injection is integrated into gas turbine cycles in order to___________________?
Show answer Hide answer
Answer: B. control output of turbine
Water injection into gas turbines is utilized to increase mass flow and control or boost the power output of the turbine. Injecting liquid water into the combustion chamber or compressor discharge causes it to flash into...
Q3. Identify the false claim regarding the advantages of multi-stage versus single-stage compression_________________?
Show answer Hide answer
Answer: E. lower volumetric efficiency
Multi-stage compression actually improves volumetric efficiency compared to single-stage compression by reducing the pressure range per cylinder and minimizing clearance expansion losses.
Q4. The work ratio of a gas turbine system represents the proportion of______________________?
Show answer Hide answer
Answer: A. net work output and work done by turbine
The work ratio is mathematically defined as the net work output divided by the total turbine work. Compressor work must be subtracted from turbine gross work to determine the net useful output. This ratio highlights the...
Q5. Turbojet propulsion powerplants are capable of utilizing which fuel varieties _____________________?
Show answer Hide answer
Answer: C. kerosene
Turbojets require specialized liquid hydrocarbon fuels with high energy density. Kerosene provides the optimal balance of viscosity, volatility, and freezing point. Refined kerosene fractions meet all military and civil...
Q6. Identify the incorrect statement concerning compressed air receiver tanks ___________________?
Show answer Hide answer
Answer: C. These increase compressor efficiency
Receiver tanks act as reservoirs, dampen pulsations, and trap moisture, but they do not inherently increase the thermodynamic efficiency of the compressor itself. Adding a storage tank introduces surface area for heat lo...