Gas turbine work ratios can be enhanced through____________________?
Show answer Hide answer
Answer: E. A. and C. above
Explanation
The work ratio of a gas turbine measures net work output divided by the total positive work produced by the turbine. Decreasing the work required for compression leaves more net power available for external mechanical work output. Increasing the turbine work output directly raises the numerator of the work ratio fraction, enhancing overall performance. Gas turbines consume a large fraction of their turbine power just to drive internal air compressors. Improving the work ratio makes the gas turbine cycle less sensitive to component inefficiencies and pressure losses. Methods to decrease compression work include intercooling, while turbine work is increased via high entry temperatures and reheating.
Increasing compression work would consume more power, thereby lowering the net work output and degrading the work ratio. Decreasing turbine work reduces the power generated by the system, lowering both net output and work ratio. Individual options are correct individually, making the combined choice the accurate comprehensive answer.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Water injection is integrated into gas turbine cycles in order to___________________?
Show answer Hide answer
Answer: B. control output of turbine
Water injection into gas turbines is utilized to increase mass flow and control or boost the power output of the turbine. Injecting liquid water into the combustion chamber or compressor discharge causes it to flash into...
Q2. Identify the false claim regarding the advantages of multi-stage versus single-stage compression_________________?
Show answer Hide answer
Answer: E. lower volumetric efficiency
Multi-stage compression actually improves volumetric efficiency compared to single-stage compression by reducing the pressure range per cylinder and minimizing clearance expansion losses.
Q3. Engine connecting rods are predominantly fabricated from_________________?
Show answer Hide answer
Answer: C. medium carbon steel
Engine connecting rods require high tensile strength and toughness, typically achieved using medium carbon steels. Medium carbon steels provide an optimal balance of ductility, hardness, and fatigue resistance under load...
Q4. Turbojet propulsion powerplants are capable of utilizing which fuel varieties _____________________?
Show answer Hide answer
Answer: C. kerosene
Turbojets require specialized liquid hydrocarbon fuels with high energy density. Kerosene provides the optimal balance of viscosity, volatility, and freezing point. Refined kerosene fractions meet all military and civil...
Q5. Identify the incorrect statement concerning compressed air receiver tanks ___________________?
Show answer Hide answer
Answer: C. These increase compressor efficiency
Receiver tanks act as reservoirs, dampen pulsations, and trap moisture, but they do not inherently increase the thermodynamic efficiency of the compressor itself. Adding a storage tank introduces surface area for heat lo...
Q6. Combustion efficiency in gas turbine combustors operating with ideal combustion approaches levels on the order of________________?
Show answer Hide answer
Answer: E. 99%
Modern gas turbine combustors are designed for nearly complete combustion, achieving efficiencies around ninety-nine percent. Advanced mixing nozzles and residence time optimization ensure almost all fuel chemical energy...