Achieving isothermal compression efficiency requires operating the compressor__________________?
Show answer Hide answer
Answer: B. at very slow speed
Explanation
To allow enough time for heat rejection and approximate an isothermal process, a compressor must run slowly. Running a compressor at very slow speeds keeps gas temperatures from rising during the compression cycle. Thermal energy generated during compression escapes through the cylinder walls when time permits. An isothermal process is a thermodynamic change where the system temperature remains constant. Rapid compression causes gases to heat up, deviating significantly from ideal isothermal conditions. Heat transfer requires adequate time to conduct thermal energy away from the compressed gas mass.
Isothermal compression requires the minimum theoretical work input compared to adiabatic compression. Practical industrial compressors run at high speeds for output, trading efficiency for volume. Intercooling between compressor stages helps approach isothermal compression efficiency in practice. Option A suggests high speed, which generates rapid heat and creates adiabatic rather than isothermal flow. Option C suggests average speed, which still produces too much frictional and compressional heat. Option D suggests zero speed, which means the compressor is stopped and performs no work at all.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Killed steels are defined as those steels that have been__________________?
Show answer Hide answer
Answer: C. which are deoxidised in the ladle with silicon and aluminium
Killed steels are fully deoxidized in the steelmaking ladle using active deoxidizing elements like silicon and aluminum. This chemical deoxidation eliminates dissolved oxygen before casting, preventing carbon monoxide ga...
Q2. While highly efficient, isothermal compression is impractical because_________________?
Show answer Hide answer
Answer: D. compressor has to run at very slow speed to achieve it
Isothermal compression requires gas temperature to remain constant by continuously removing heat during the process. Rapid compression generates heat quickly, meaning effective heat rejection requires massive surface are...
Q3. Kinematic viscosity is formulated as_________________?
Show answer Hide answer
Answer: A. dynamic viscosity/density
Kinematic viscosity relates dynamic fluid friction directly to the inertial mass density of the fluid. Mathematical formulation defines kinematic viscosity as dynamic viscosity divided by fluid density. This ratio simpli...
Q4. Pouring lead into pipe joints is suitable for pipes fabricated from____________________?
Show answer Hide answer
Answer: A. cast iron
Pouring molten lead into pipe joints is a traditional method suitable for pipes fabricated from cast iron. Cast iron bell-and-spigot joints provide the necessary thermal mass and rigidity to contain molten lead safely. O...
Q5. At atmospheric pressure, dry steam latent heat equals____________________?
Show answer Hide answer
Answer: A. 539 kcal/kg
Latent heat of vaporization represents the thermal energy required to convert liquid water into steam at constant pressure. Experimental thermodynamic measurements establish that water requires approximately 539 kilocalo...
Q6. Accelerated-circulation boilers feature________________?
Show answer Hide answer
Answer: B. water is supplied in drum and through downcomers” located in atmospheric conditon it passes to the water wall and rises to durm in the from of mixture of water and steam
Accelerated-circulation boilers utilize density differences between fluid columns to promote rapid water movement. Water is supplied from steam drums through external downcomers to heated water wall tubes. Heat conversio...