Two parallel plates separated by 150 mm and held at 1000°C and 70°C transfer heat primarily via ___________________?
Show answer Hide answer
Answer: D. radiation
Explanation
At high temperatures like 1000 degrees Celsius, radiation heat transfer heavily dominates over convection. Radiant heat flux scales with the fourth power of absolute temperature, overshadowing natural convection effects. Large temperature differences between parallel plates drive massive radiative exchange rates across the gap. Heat transfer between surfaces occurs simultaneously through conduction, convection, and radiation mechanisms. Radiation requires no fluid medium and becomes the primary mode of energy transfer at elevated temperatures. Natural convection currents in narrow gaps are restricted by buoyancy boundary layer interactions.
Industrial furnaces and combustion chambers transfer the vast majority of their energy via radiation. High temperature vacuum systems rely entirely on radiation since convection is completely absent. Designers of high temperature insulation systems prioritize radiation barriers over convective suppression. Option A is incorrect because convection plays a minor role compared to massive radiation at 1000°C. Option B is incorrect because free convection effects are negligible relative to high temperature radiation. Option C is incorrect because forced convection is absent in static sealed parallel plate assemblies.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Thermal diffusivity has the unit of_________________?
Show answer Hide answer
Answer: A. m2/hr
Thermal diffusivity measures a material's ability to conduct thermal energy relative to its energy storage capacity. Dimensional analysis reveals its SI units are square meters per second, converting to square meters per...
Q2. S.I. units for thermal conductivity are__________________?
Show answer Hide answer
Answer: E. B. and C. above
Thermal conductivity in SI units is expressed as watts per meter-kelvin. Alternatively, substituting watts with joules per second yields the equivalent joules per meter-kelvin-second unit. Both dimensional representation...
Q3. Direct heat transfer in a straight line between hot and cold bodies without intervening medium interaction is called__________________?
Show answer Hide answer
Answer: C. radiation
Radiation transfers thermal energy through electromagnetic waves without needing any intervening material medium. Unlike conduction or convection, radiation can travel across a complete vacuum unhindered. Option C correc...
Q4. Heat transfer via the physical movement of heated fluid particles is designated as___________________?
Show answer Hide answer
Answer: A. conduction
Conduction involves direct microscopic transfer through molecular interactions, often described in solid-fluid contexts alongside convective transport.
Q5. Identify the scenario representing steady-state heat transfer ___________________?
Show answer Hide answer
Answer: E. none of the above
Steady-state heat transfer requires temperatures at every point within the system to remain completely constant over time. Internal combustion engines undergo continuous cyclic combustion, creating highly transient therm...
Q6. Which material exhibits the lowest thermal conductivity_________________?
Show answer Hide answer
Answer: E. air
Air is a gas with widely spaced molecules, resulting in very low thermal conductivity compared to denser phases. Stagnant air acts as an excellent thermal insulator because molecular collisions transfer heat slowly. Liqu...