Which material exhibits the lowest thermal conductivity_________________?
Show answer Hide answer
Answer: E. air
Explanation
Air is a gas with widely spaced molecules, resulting in very low thermal conductivity compared to denser phases. Stagnant air acts as an excellent thermal insulator because molecular collisions transfer heat slowly. Liquids, plastics, glass, and rubber all possess denser molecular structures that conduct heat much faster. Thermal conductivity depends on molecular density and the freedom of electrons or lattice vibrations to carry heat. Gases transfer heat primarily through slow molecular diffusion and collision processes. Solid materials feature strong atomic bonding matrices that transmit thermal vibrations rapidly across distances.
Double-pane windows trap a layer of air or inert gas to minimize conductive heat loss from buildings. Down jackets and fiberglass insulation trap pockets of air to keep people warm in cold weather. Engineering designs frequently exploit stagnant air gaps to reduce unwanted heat transfer in appliances. Glass is a solid amorphous material with a much higher thermal conductivity than trapped air pockets. Water is a liquid with significantly higher thermal conductivity than stagnant gases. Plastics and rubber are dense polymeric solids that conduct heat considerably faster than air.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Two parallel plates separated by 150 mm and held at 1000°C and 70°C transfer heat primarily via ___________________?
Show answer Hide answer
Answer: D. radiation
At high temperatures like 1000 degrees Celsius, radiation heat transfer heavily dominates over convection. Radiant heat flux scales with the fourth power of absolute temperature, overshadowing natural convection effects....
Q2. Heating dry steam past its saturation point is known as_____________________?
Show answer Hide answer
Answer: B. superheating
Superheating involves adding thermal energy to dry saturated steam past its boiling point. This process raises the steam temperature well above saturation levels at constant pressure. Superheated steam prevents moisture...
Q3. Heat transfer via the physical movement of heated fluid particles is designated as___________________?
Show answer Hide answer
Answer: A. conduction
Conduction involves direct microscopic transfer through molecular interactions, often described in solid-fluid contexts alongside convective transport.
Q4. An air-standard Diesel cycle efficiency responds to an increase in C„ by_______________?
Show answer Hide answer
Answer: B. decreases
An increase in the specific heat ratio inversely affects the air-standard Diesel cycle thermal efficiency formulation. Mathematical derivation of Diesel cycle efficiency shows an inverse dependence on specific heat ratio...
Q5. Heat transfer via direct molecular interaction is referred to as__________________?
Show answer Hide answer
Answer: A. conduction
Conduction is the transfer of heat through direct atomic and molecular collisions within a medium. Thermal energy passes from high energy particles to adjacent lower energy neighbors via physical contact. This microscopi...
Q6. Which substance is anticipated to have the highest thermal conductivity_______________?
Show answer Hide answer
Answer: B. solid ice
Solid ice features an ordered crystalline lattice that conducts phonons more efficiently. Liquid water molecules experience randomized motion which disrupts rapid thermal conduction. Consequently, solid ice exhibits a hi...