S.I. units for thermal conductivity are__________________?
Show answer Hide answer
Answer: E. B. and C. above
Explanation
Thermal conductivity in SI units is expressed as watts per meter-kelvin. Alternatively, substituting watts with joules per second yields the equivalent joules per meter-kelvin-second unit. Both dimensional representations correctly quantify conductive heat transfer rates through a material layer. Fourier's law of heat conduction relates heat flux directly to thermal conductivity and temperature gradients. One watt is equal to one joule of energy transferred per second of elapsed time. Kelvin and degree Celsius temperature intervals are identical in magnitude for thermal conductivity calculations.
Thermal conductivity ratings help engineers select appropriate building insulation and engine cooling materials. Standardizing units ensures seamless international collaboration in thermal engineering research and design. Heat exchanger performance evaluations require correct dimensional units for all material transport properties. Joules per square meter second represents heat flux rather than material thermal conductivity. Selecting only the first alternative ignores the equally valid watt-based SI unit commonly used in engineering. Other combinations of units that lack distance or temperature dimensions fail to represent thermal conductivity.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Log mean temperature difference for counter-flow versus parallel-flow arrangements is________________?
Show answer Hide answer
Answer: B. more
Counter-flow heat exchangers maintain a more uniform temperature difference along their entire length than parallel-flow layouts. This balanced thermal gradient results in a higher log mean temperature difference for ide...
Q2. The proportion of radiant energy absorbed by a surface relative to total incident radiation is termed_________________?
Show answer Hide answer
Answer: A. absorptive power
Absorptive power represents the specific fraction of incident radiant energy absorbed by a surface. This fundamental property quantifies how effectively an object captures incoming electromagnetic radiation waves. Total...
Q3. The thermal diffusivity parameter is expressed as __________________?
Show answer Hide answer
Answer: D. all of the above
Thermal diffusivity is defined mathematically as thermal conductivity divided by density and specific heat. It is therefore directly proportional to thermal conductivity in the numerator. It is inversely proportional to...
Q4. M.K.S. units for thermal conductivity are ___________________?
Show answer Hide answer
Answer: B. kcal-m/hr m2 °C
In MKS engineering units, thermal conductivity is expressed as kilocalories multiplied by meters per hour, square meter, and degree Celsius. Simplifying this expression yields kilocalories per hour, meter, and degree Cel...
Q5. Two parallel plates separated by 150 mm and held at 1000°C and 70°C transfer heat primarily via ___________________?
Show answer Hide answer
Answer: D. radiation
At high temperatures like 1000 degrees Celsius, radiation heat transfer heavily dominates over convection. Radiant heat flux scales with the fourth power of absolute temperature, overshadowing natural convection effects....
Q6. Heating dry steam past its saturation point is known as_____________________?
Show answer Hide answer
Answer: B. superheating
Superheating involves adding thermal energy to dry saturated steam past its boiling point. This process raises the steam temperature well above saturation levels at constant pressure. Superheated steam prevents moisture...