The thermal diffusivity parameter is expressed as __________________?
Show answer Hide answer
Answer: D. all of the above
Explanation
Thermal diffusivity is defined mathematically as thermal conductivity divided by density and specific heat. It is therefore directly proportional to thermal conductivity in the numerator. It is inversely proportional to both density and specific heat in the denominator. Transient heat conduction depends on how fast heat spreads relative to energy storage. Density and specific heat together dictate how much thermal energy a volume can store. Combining these three fundamental properties yields the standard thermal diffusivity formula.
Transient heat transfer calculations in engineering design require all three material properties. Materials with high diffusivity respond rapidly to changing thermal boundary conditions. Engineers select thermal barrier coatings based on low diffusivity and high melting points. Option A lists only one correct proportionality while ignoring density and specific heat. Option B highlights density but misses conductivity and specific heat dependencies. Option C mentions specific heat but omits conductivity and density parameters.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Thermal diffusivity is formulated as ____________________?
Show answer Hide answer
Answer: D. a physical property of the material
Thermal diffusivity is a fundamental thermophysical property intrinsic to each specific engineering material. It measures the ability of a material to conduct thermal energy relative to its stored thermal energy capacity...
Q2. A material's thermal conductivity can be described as its ability to________________?
Show answer Hide answer
Answer: D. all of the above
Thermal conductivity governs how rapidly heat passes through a material under a temperature gradient. Fourier law links heat flow rate directly to cross-sectional area, thickness, and temperature difference. Option D is...
Q3. Log mean temperature difference for counter-flow versus parallel-flow arrangements is________________?
Show answer Hide answer
Answer: B. more
Counter-flow heat exchangers maintain a more uniform temperature difference along their entire length than parallel-flow layouts. This balanced thermal gradient results in a higher log mean temperature difference for ide...
Q4. S.I. units for thermal conductivity are__________________?
Show answer Hide answer
Answer: E. B. and C. above
Thermal conductivity in SI units is expressed as watts per meter-kelvin. Alternatively, substituting watts with joules per second yields the equivalent joules per meter-kelvin-second unit. Both dimensional representation...
Q5. Direct heat transfer in a straight line between hot and cold bodies without intervening medium interaction is called__________________?
Show answer Hide answer
Answer: C. radiation
Radiation transfers thermal energy through electromagnetic waves without needing any intervening material medium. Unlike conduction or convection, radiation can travel across a complete vacuum unhindered. Option C correc...
Q6. M.K.S. units for thermal conductivity are ___________________?
Show answer Hide answer
Answer: B. kcal-m/hr m2 °C
In MKS engineering units, thermal conductivity is expressed as kilocalories multiplied by meters per hour, square meter, and degree Celsius. Simplifying this expression yields kilocalories per hour, meter, and degree Cel...