M.K.S. units for thermal conductivity are ___________________?
Show answer Hide answer
Answer: B. kcal-m/hr m2 °C
Explanation
In MKS engineering units, thermal conductivity is expressed as kilocalories multiplied by meters per hour, square meter, and degree Celsius. Simplifying this expression yields kilocalories per hour, meter, and degree Celsius as the standard engineering unit. Dimensional analysis of Fourier's law confirms this exact combination of thermal and geometric units. The MKS system uses meters, kilograms, and seconds as fundamental base units for engineering calculations. Thermal conductivity measures the heat flux per unit area divided by the temperature gradient per unit length. Metric conversion factors bridge older engineering units with modern SI watt-meter-kelvin standards.
Older mechanical engineering textbooks and handbooks frequently tabulate material properties in MKS thermal units. Thermal design calculations require careful unit consistency when evaluating heat loss through layered pipe walls. Engineers must convert between MKS and SI units when reviewing international thermal engineering specifications. Units lacking spatial length terms in the numerator fail to balance Fourier's dimensional equations correctly. Area terms in the denominator without proper length scaling distort the heat transfer rate calculations. Incorrectly placed temperature units violate the fundamental thermal gradient definition in conduction formulas.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. The thermal diffusivity parameter is expressed as __________________?
Show answer Hide answer
Answer: D. all of the above
Thermal diffusivity is defined mathematically as thermal conductivity divided by density and specific heat. It is therefore directly proportional to thermal conductivity in the numerator. It is inversely proportional to...
Q2. Thermal diffusivity has the unit of_________________?
Show answer Hide answer
Answer: A. m2/hr
Thermal diffusivity measures a material's ability to conduct thermal energy relative to its energy storage capacity. Dimensional analysis reveals its SI units are square meters per second, converting to square meters per...
Q3. S.I. units for thermal conductivity are__________________?
Show answer Hide answer
Answer: E. B. and C. above
Thermal conductivity in SI units is expressed as watts per meter-kelvin. Alternatively, substituting watts with joules per second yields the equivalent joules per meter-kelvin-second unit. Both dimensional representation...
Q4. Heating dry steam past its saturation point is known as_____________________?
Show answer Hide answer
Answer: B. superheating
Superheating involves adding thermal energy to dry saturated steam past its boiling point. This process raises the steam temperature well above saturation levels at constant pressure. Superheated steam prevents moisture...
Q5. Heat transfer via the physical movement of heated fluid particles is designated as___________________?
Show answer Hide answer
Answer: A. conduction
Conduction involves direct microscopic transfer through molecular interactions, often described in solid-fluid contexts alongside convective transport.
Q6. Identify the scenario representing steady-state heat transfer ___________________?
Show answer Hide answer
Answer: E. none of the above
Steady-state heat transfer requires temperatures at every point within the system to remain completely constant over time. Internal combustion engines undergo continuous cyclic combustion, creating highly transient therm...