These specific elements feature a face-centered cubic lattice__________________?
Show answer Hide answer
Answer: A. gamma iron (910° to 1400°C), Cu, Ag, Au, Al, Ni, Pb, Pt
Explanation
Gamma iron and numerous ductile non-ferrous metals crystallize into face-centered cubic lattices. This specific atomic arrangement features atoms located at each corner and cube face center. Face-centered cubic structures provide numerous slip systems ensuring high ductility and malleability. Crystalline solids arrange their atoms in repeating three-dimensional geometric lattice patterns. Copper, silver, gold, and aluminum are prime examples of metals with this dense packing. Phase transformations in steel alter its crystal lattice structure at elevated furnace temperatures.
Materials scientists study crystal structures to predict metal mechanical properties and formability. Heat treatment processes depend entirely on phase changes between different atomic lattice configurations. Manufacturing operations like sheet metal stamping require high ductility associated with this lattice. Option B lists metals typically possessing hexagonal close-packed crystal lattice structures instead. Option C describes alpha iron structures which form body-centered cubic lattices at room temperature. Option D is incorrect because only the first option lists true face-centered cubic metals.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Water flow through a pipe roughly 3 meters across is measured using__________________?
Show answer Hide answer
Answer: D. pitot tube
A pitot tube is commonly used to measure fluid velocity and flow rates in large pipes, such as those approximately 3 meters across. Large-diameter conduits prevent the use of standard inline flow meters, making insertion...
Q2. For a system of forces to remain in equilibrium, it is necessary that they be_________________?
Show answer Hide answer
Answer: C. both A. and B. above
Static equilibrium requires that the vector sum of all forces and the sum of all moments equal zero. For a force system to satisfy these equilibrium conditions, the forces must act within the same plane. Additionally, th...
Q3. Fire tube boilers are restricted to a top design working pressure of ____________________?
Show answer Hide answer
Answer: C. 17 kg/cm2
Fire tube boilers are generally limited to lower working pressures typically up to seventeen kilograms per square centimeter. The large outer cylindrical shell of a fire tube boiler must contain high-pressure steam over...
Q4. Forces that intersect at a single point but whose lines of action do not share a common plane are termed_________________?
Show answer Hide answer
Answer: B. non-coplanar concurrent forces
Concurrent forces intersect at a single common point within their geometric coordinate system layout. When their lines of action do not occupy the same two-dimensional plane, they are classified as non-coplanar. Combinin...
Q5. Maintaining identical power and speed, how does a four-stroke engine flywheel compare in size to a two-stroke I.C. engine flywheel________________?
Show answer Hide answer
Answer: B. bigger
A four-stroke engine fires once every two crankshaft revolutions requiring a bigger flywheel to maintain uniform speed. The extended non-firing power strokes in a four-stroke engine create larger speed fluctuations durin...
Q6. Given equal tube diameter and wall thickness, a water-tube boiler relative to a fire-tube boiler features____________________?
Show answer Hide answer
Answer: A. more heating surface
Water-tube boilers route water inside smaller diameter tubes with hot gases flowing externally around them. This arrangement provides a much larger cumulative heat transfer surface area compared to fire-tube designs of e...