Select the statement that is incorrect_________________?
Show answer Hide answer
Answer: D. the sine of the angle of repose is equal to coefficient to friction
Explanation
The tangent of the angle of repose equals the friction coefficient, making the sine statement incorrect. Trigonometric analysis of inclined planes shows that the coefficient of friction equals tangent theta. Stating that the sine of the angle of repose equals the friction coefficient violates equilibrium physics. Friction calculations on inclined planes use trigonometric ratios to relate normal and parallel forces. The angle of repose is defined where the tangent of the slope angle equals the static friction coefficient. Geometric proofs confirm that static friction equals the normal load multiplied by the tangent angle.
Engineering examinations frequently test trigonometric relationships involving friction coefficients and angles. Understanding correct friction formulas prevents calculation errors in mechanical design and structural analysis. Physics software models rely on accurate tangent relationships to simulate sliding friction on slopes. The tangent of the angle of friction is indeed equal to the coefficient of friction, making it a true statement. The angle of repose equals the angle of friction for dry sliding surfaces under limiting conditions. The tangent of the angle of repose equals the coefficient of friction, rendering that specific option correct.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. The center of percussion is defined as___________________?
Show answer Hide answer
Answer: C. the point of application of the resultant of all the forces tending to cause a body to rotate about a certain axis
The center of percussion marks the exact point where resultant forces cause pure rotation. Hitting this specific location on a suspended body produces no reactive shock at the pivot. Mathematical derivations define it us...
Q2. Water flow through a pipe roughly 3 meters across is measured using__________________?
Show answer Hide answer
Answer: D. pitot tube
A pitot tube is commonly used to measure fluid velocity and flow rates in large pipes, such as those approximately 3 meters across. Large-diameter conduits prevent the use of standard inline flow meters, making insertion...
Q3. For a system of forces to remain in equilibrium, it is necessary that they be_________________?
Show answer Hide answer
Answer: C. both A. and B. above
Static equilibrium requires that the vector sum of all forces and the sum of all moments equal zero. For a force system to satisfy these equilibrium conditions, the forces must act within the same plane. Additionally, th...
Q4. For a body floating in a fluid, the normal pressure exerted by the liquid acts upon____________________?
Show answer Hide answer
Answer: D. all points on the surface of the body
Normal pressure exerted by a fluid on a submerged or floating body acts perpendicularly to all points in contact along the entire surface. Fluid pressure has no directional component parallel to a frictionless surface, c...
Q5. Forces that intersect at a single point but whose lines of action do not share a common plane are termed_________________?
Show answer Hide answer
Answer: B. non-coplanar concurrent forces
Concurrent forces intersect at a single common point within their geometric coordinate system layout. When their lines of action do not occupy the same two-dimensional plane, they are classified as non-coplanar. Combinin...
Q6. Maintaining identical power and speed, how does a four-stroke engine flywheel compare in size to a two-stroke I.C. engine flywheel________________?
Show answer Hide answer
Answer: B. bigger
A four-stroke engine fires once every two crankshaft revolutions requiring a bigger flywheel to maintain uniform speed. The extended non-firing power strokes in a four-stroke engine create larger speed fluctuations durin...