The peak frictional resistance that arises just as an object starts sliding across a surface is termed__________________?
Show answer Hide answer
Answer: A. limiting friction
Explanation
Limiting friction is the maximum frictional force that must be overcome as sliding begins. It represents the peak threshold between stationary static friction and active sliding kinetic friction. Exceeding this limiting force causes the stationary object to transition into continuous motion. Frictional resistance between dry solid surfaces varies depending on whether the objects are moving or stationary. Static friction increases to match applied loads until it reaches its absolute peak, known as limiting friction. Once motion starts, the required frictional resistance drops slightly into the kinetic friction regime.
Machine designers calculate limiting friction to determine the minimum starting torque required for electric motors. Heavy machinery placement relies on understanding limiting friction to prevent accidental sliding during transport. Automotive braking system design must account for the transition between static grip and sliding friction. Sliding friction refers to the lower resistive force experienced after the object is already in motion. Rolling friction describes the resistance of wheels or cylinders rolling smoothly across a support surface. Dynamic and kinematic friction terms both describe active motion resistance rather than the starting peak.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. The coefficient of friction relies upon_______________?
Show answer Hide answer
Answer: A. nature of surfaces
The coefficient of friction primarily depends on the material composition and physical nature of the contacting surfaces. Surface roughness, microscopic bonding, and chemical contamination dictate how strongly two materi...
Q2. The center of gravity for a right circular solid cone of height h is situated at this distance from the base______________?
Show answer Hide answer
Answer: D. h/4
The center of gravity of a right circular solid cone of height h is situated at a distance of h/4 from its base. Integration of differential volume elements along the conical height yields this exact centroid location. M...
Q3. The effort required to elevate a load W using a screw jack with helix angle a and friction angle <j) equals _________________?
Show answer Hide answer
Answer: A. Wtan(a + )
The effort required to lift a load using a screw jack with helix and friction angles is given by W tan(alpha + phi). This mathematical formula incorporates the helix angle to account for lead and the friction angle for c...
Q4. The friction coefficient is defined as the_________________?
Show answer Hide answer
Answer: B. ratio of limiting friction and normal reaction
The coefficient of friction is defined as the ratio of the limiting friction force to the normal reaction force. Dividing the maximum frictional resistance just before sliding begins by the perpendicular pressing force y...
Q5. The proportion of limiting friction to normal reaction is designated as _____________________?
Show answer Hide answer
Answer: A. coefficient of friction
The coefficient of friction is defined mathematically as the ratio of limiting friction force to normal reaction force. Dividing the maximum frictional force resisting motion by the perpendicular pressing force yields th...
Q6. The center of percussion for a homogeneous rod of length L hung from its top will be___________________?
Show answer Hide answer
Answer: D. 2L/3
The center of percussion for a uniform slender rod of length L suspended from one end is located at two-thirds of L. Striking the rod at this specific distance produces zero reaction force at the pivot suspension point....