The coefficient of friction relies upon_______________?
Show answer Hide answer
Answer: A. nature of surfaces
Explanation
The coefficient of friction primarily depends on the material composition and physical nature of the contacting surfaces. Surface roughness, microscopic bonding, and chemical contamination dictate how strongly two materials resist relative sliding. Different material pairs, such as steel on ice versus rubber on asphalt, exhibit vastly different frictional coefficients. The coefficient of friction is a dimensionless scalar value representing the resistance between two solid sliding surfaces. Contacting surfaces always feature microscopic asperities that interlock and impede smooth relative motion. Lubricants are deliberately introduced between surfaces to alter the nature of contact and lower the effective friction coefficient.
The apparent macroscopic contact area does not alter the coefficient of friction for standard dry sliding surfaces. The geometric shape of sliding bodies has no direct effect on the material pair friction coefficient value. Options claiming that area and shape affect friction ignore classical empirical laws of solid-on-solid sliding friction.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. A triangle's center of gravity is located at the intersection of __________________?
Show answer Hide answer
Answer: A. concurrence of the medians
The center of gravity of a triangle is located at the intersection point of its three medians. A median is a straight line drawn from any vertex of the triangle to the midpoint of the opposite side. These three medians i...
Q2. Identify the false statement from the choices below ?
Show answer Hide answer
Answer: D. The C.G. of a semicircle is at a distance of r/2 from the center
The center of gravity of a semicircle is actually located at a distance of four r over three pi from its center. Stating that the center of gravity is at a distance of r over two from the center is geometrically incorrec...
Q3. The inclination angle of a slope when an object resting on it begins sliding downward is termed the angle of_______________?
Show answer Hide answer
Answer: C. repose
The angle of repose is the maximum inclination angle where an object remains stationary without sliding. When the slope exceeds this specific angle, gravitational forces overcome static friction, causing sliding. It prov...
Q4. The effort required to elevate a load W using a screw jack with helix angle a and friction angle <j) equals _________________?
Show answer Hide answer
Answer: A. Wtan(a + )
The effort required to lift a load using a screw jack with helix and friction angles is given by W tan(alpha + phi). This mathematical formula incorporates the helix angle to account for lead and the friction angle for c...
Q5. Friction coefficient is dependent on________________?
Show answer Hide answer
Answer: D. nature of surface
The friction coefficient is determined primarily by the nature and material properties of the contacting surfaces. Surface finish, chemical composition, and contamination levels dictate how strongly microscopic asperitie...
Q6. The peak frictional resistance that arises just as an object starts sliding across a surface is termed__________________?
Show answer Hide answer
Answer: A. limiting friction
Limiting friction is the maximum frictional force that must be overcome as sliding begins. It represents the peak threshold between stationary static friction and active sliding kinetic friction. Exceeding this limiting...