Skip to main content
Sarkari MCQs Government Exam Question Bank
Menu
Question no. 57095

The friction coefficient is defined as the_________________?

Select your answer for: The friction coefficient is defined as the_________________?
Show answer

Answer: B. ratio of limiting friction and normal reaction

Explanation

The coefficient of friction is defined as the ratio of the limiting friction force to the normal reaction force. Dividing the maximum frictional resistance just before sliding begins by the perpendicular pressing force yields this ratio. This fundamental relationship remains constant for a given pair of dry sliding materials under normal loading conditions. Limiting friction represents the maximum threshold of static friction before relative motion between surfaces commences. Normal reaction force is the perpendicular component of contact force pressing the two solid bodies together. Experimental testing measures these force values to establish reliable friction coefficient databases for engineering design.

The angle between the normal reaction and the resultant contact force defines the angle of friction, not the coefficient itself. Defining friction solely as the force acting when a body is about to move describes limiting friction rather than its ratio. Tangent of the angle of repose equals the coefficient of friction, but it is a derived geometric property rather than the primary definition.

Subject
Engineering
Topic
—
Difficulty
medium

Related questions

Q1. The effort required to elevate a load W using a screw jack with helix angle a and friction angle <j) equals _________________?

Select your answer for: The effort required to elevate a load W using a screw jack with helix angle a and friction angle <j) equals _________________?
Show answer

Answer: A. Wtan(a + )

The effort required to lift a load using a screw jack with helix and friction angles is given by W tan(alpha + phi). This mathematical formula incorporates the helix angle to account for lead and the friction angle for c...

Q2. Friction coefficient is dependent on________________?

Select your answer for: Friction coefficient is dependent on________________?
Show answer

Answer: D. nature of surface

The friction coefficient is determined primarily by the nature and material properties of the contacting surfaces. Surface finish, chemical composition, and contamination levels dictate how strongly microscopic asperitie...

Q3. The peak frictional resistance that arises just as an object starts sliding across a surface is termed__________________?

Select your answer for: The peak frictional resistance that arises just as an object starts sliding across a surface is termed__________________?
Show answer

Answer: A. limiting friction

Limiting friction is the maximum frictional force that must be overcome as sliding begins. It represents the peak threshold between stationary static friction and active sliding kinetic friction. Exceeding this limiting...

Q4. The center of percussion for a homogeneous rod of length L hung from its top will be___________________?

Select your answer for: The center of percussion for a homogeneous rod of length L hung from its top will be___________________?
Show answer

Answer: D. 2L/3

The center of percussion for a uniform slender rod of length L suspended from one end is located at two-thirds of L. Striking the rod at this specific distance produces zero reaction force at the pivot suspension point....

Q5. Framed structures experience various member loadings such as_________________?

Select your answer for: Framed structures experience various member loadings such as_________________?
Show answer

Answer: A. compression or tension

Members of a framed structure are typically slender links designed to experience pure axial loading. Assuming pin-jointed ideal trusses, individual structural members operate in either pure compression or pure tension. B...

Q6. What is the resultant of three couples: 20 kg force, 0.5 m arm, $ ve sense 30 kg force, 1 m arm, – ve sense 40 kg force, 0.25 m arm, + ve sense with a 0.5 m arm__________________?

Select your answer for: What is the resultant of three couples: 20 kg force, 0.5 m arm, $ ve sense 30 kg force, 1 m arm, – ve sense 40 kg force, 0.25 m arm, + ve sense with a 0.5 m arm__________________?
Show answer

Answer: A. 20 kg, – ve sense

Calculating the net algebraic sum of the moments from the given couples yields a resultant of twenty. The resultant couple magnitude evaluates to twenty kilograms multiplied by the specified meter arm. Summing the positi...

New!

Mock Test System is now available!

Prepare for your exam with interactive mock tests. Select your subjects, attempt 100 random MCQs against the clock, and see exactly where you stand.

Start Mock Test