Skip to main content
Sarkari MCQs Government Exam Question Bank
Menu
Question no. 57156

The arrest points for iron's allotropic modifications are located at __________________?

Select your answer for: The arrest points for iron's allotropic modifications are located at __________________?
Show answer

Answer: D. the points of discontinuity

Explanation

Allotropic transformations in metals are marked by thermal arrest points where phase changes and structural reorganizations occur. During these critical temperature points heat is absorbed or released without changing the material temperature. Iron undergoes specific allotropic crystal structure changes as it heats up or cools down through these points. Allotropy refers to the property of an element existing in two or more different crystal structural forms. Iron transitions from body-centered cubic ferrite to face-centered cubic austenite at specific critical temperatures. Cooling curves exhibit flat thermal arrest plateaus during phase transformations due to latent heat release.

Metallurgists monitor thermal arrest points carefully during heat treatment processes like annealing and quenching. Steel microstructure and mechanical hardness depend heavily on controlling these high-temperature phase transformations. Foundry operations utilize phase diagrams based on iron allotropy to cast high-strength alloy components. Option A is incorrect because significant structural and phase changes do occur at thermal arrest points. Option B is wrong since allotropic transformation temperatures vary widely across different metal alloy types. Option C and D do not accurately describe the thermodynamic phase change mechanism of thermal arrest.

Subject
Engineering
Topic
—
Difficulty
medium

Related questions

Q1. Gamma iron is present at the following temperature___________________?

Select your answer for: Gamma iron is present at the following temperature___________________?
Show answer

Answer: D. between 910°C and 1400°C

Gamma iron, also known as austenite, exists stably between nine hundred ten and fourteen hundred degrees Celsius. At these elevated temperatures, the iron crystal lattice rearranges into a face-centered cubic structure....

Q2. Fuel combustion fundamentally requires_____________________?

Select your answer for: Fuel combustion fundamentally requires_____________________?
Show answer

Answer: D. all the three above

Complete combustion requires a precise fuel-air ratio to ensure sufficient oxidant availability. The mixture must reach its proper ignition temperature to initiate rapid chemical oxidation reactions. Oxygen supplies the...

Q3. Due to the influence of _______________, the free surface of a liquid naturally tends to shrink into the smallest possible area.

Select your answer for: Due to the influence of _______________, the free surface of a liquid naturally tends to shrink into the smallest possible area.
Show answer

Answer: A. surface tension

Surface tension creates a tensile membrane effect on liquid surfaces, causing them to shrink to the smallest possible area. Cohesive intermolecular forces pull surface molecules inward toward the bulk liquid, creating in...

Q4. For dynamic similarity, besides geometric resemblance between model and prototype, this parameter must also match____________________?

Select your answer for: For dynamic similarity, besides geometric resemblance between model and prototype, this parameter must also match____________________?
Show answer

Answer: D. all the four ratios of inertial force to force due to viscosity, gravitation, sur-face tension, and elasticity

Dynamic similarity requires matching geometric resemblance and all relevant dimensionless force ratios simultaneously. Inertial forces must scale proportionally with viscous, gravitational, surface tension, and elastic f...

Q5. Compared to a four-stroke engine of matching size and weight, a two-stroke engine produces power output that is_________________?

Select your answer for: Compared to a four-stroke engine of matching size and weight, a two-stroke engine produces power output that is_________________?
Show answer

Answer: D. about 1.7 times

A two-stroke engine completes a power stroke during every single crankshaft revolution. This frequent firing frequency boosts power delivery compared to standard four-stroke engine designs. Scavenging limits and mechanic...

Q6. Free cutting steels are known for_____________________?

Select your answer for: Free cutting steels are known for_____________________?
Show answer

Answer: A. are used where ease in machining is the criterion

Free-cutting steels are specially alloyed with elements like sulfur or lead to improve machinability and chip breaking. These additive inclusions create microscopic discontinuities in the steel matrix that cause metal ch...

New!

Mock Test System is now available!

Prepare for your exam with interactive mock tests. Select your subjects, attempt 100 random MCQs against the clock, and see exactly where you stand.

Start Mock Test