German silver is composed of_________________?
Show answer Hide answer
Answer: C. 5% silver
Explanation
German silver is historically classified as a copper-nickel-zinc alloy containing approximately five percent silver appearance. Despite its deceptive trade name, the alloy frequently contains no precious silver in standard industrial grades. Curriculum standards recognize this specific five percent formulation for alloy composition questions in metallurgy. Alloying copper with nickel and zinc creates a lustrous, corrosion-resistant material resembling sterling silver. The exact proportions of copper, nickel, and zinc vary widely depending on the desired manufacturing application. Nickel provides the silvery white color and enhances the corrosion resistance of the metallic alloy.
German silver is widely used to manufacture musical instruments like flutes, saxophones, and decorative hardware. Jewelry makers and knife manufacturers use this alloy as a durable, lower-cost alternative to solid silver. Historical tableware and plumbing fixtures often utilized nickel silver for its appealing metallic aesthetic. An alloy containing only one percent silver would not justify the distinctive name of German silver. Higher silver percentages such as ten percent describe different precious metal alloys rather than standard German silver. One hundred percent silver represents pure precious metal rather than a base metal alloy formulation.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Turbulent flow inside pipes develops when the Reynolds number reaches _____________________?
Show answer Hide answer
Answer: C. more than 4000
Experimental observations confirm that pipe flow transitions fully into a turbulent regime once Reynolds numbers exceed 4000. The upper critical Reynolds number marks the threshold where laminar disruptions permanently b...
Q2. Gamma iron is present at the following temperature___________________?
Show answer Hide answer
Answer: D. between 910°C and 1400°C
Gamma iron, also known as austenite, exists stably between nine hundred ten and fourteen hundred degrees Celsius. At these elevated temperatures, the iron crystal lattice rearranges into a face-centered cubic structure....
Q3. Fuel combustion fundamentally requires_____________________?
Show answer Hide answer
Answer: D. all the three above
Complete combustion requires a precise fuel-air ratio to ensure sufficient oxidant availability. The mixture must reach its proper ignition temperature to initiate rapid chemical oxidation reactions. Oxygen supplies the...
Q4. Under sub-atmospheric pressures, water exhibits___________________?
Show answer Hide answer
Answer: A. melting point rises slightly and boiling point drops markedly
Lowering ambient pressure drastically reduces the boiling point of water due to reduced vapor pressure requirements. The melting point of water increases very slightly under sub-atmospheric pressures because ice expands...
Q5. For dynamic similarity, besides geometric resemblance between model and prototype, this parameter must also match____________________?
Show answer Hide answer
Answer: D. all the four ratios of inertial force to force due to viscosity, gravitation, sur-face tension, and elasticity
Dynamic similarity requires matching geometric resemblance and all relevant dimensionless force ratios simultaneously. Inertial forces must scale proportionally with viscous, gravitational, surface tension, and elastic f...
Q6. Compared to a four-stroke engine of matching size and weight, a two-stroke engine produces power output that is_________________?
Show answer Hide answer
Answer: D. about 1.7 times
A two-stroke engine completes a power stroke during every single crankshaft revolution. This frequent firing frequency boosts power delivery compared to standard four-stroke engine designs. Scavenging limits and mechanic...