Efficient generation of high power output in jet reaction engines requires fuel combustion within an environment of__________________?
Show answer Hide answer
Answer: C. compressed air
Explanation
Jet engines require high oxygen mass flow rates to sustain continuous rapid combustion. Compressed air supplies the necessary oxygen density within the combustion chamber volume. Without compression, fuel would burn inefficiently and fail to produce required thrust. Jet reaction engines rely on the continuous flow Brayton thermodynamic cycle. Compressors increase ambient air pressure significantly before fuel is injected and ignited. High reaction rates generate the high-pressure gas expansion driving the turbine.
Aviation turbojets scoop up massive volumes of atmospheric air during high-speed flight. Compressor stall or failure immediately starves the combustor and halts thrust generation. Proper air compression is vital for modern high-bypass turbofan engine performance. A vacuum contains no air and cannot support combustion processes whatsoever. Uncompressed atmospheric air lacks the density needed for high-power jet reaction outputs. Pure oxygen is too hazardous and heavy for standard atmospheric jet engine operations.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Cross-compounding configurations in gas turbine installations involve__________________?
Show answer Hide answer
Answer: B. h.p. compressor is connected to l.p. turbine and l.p. compressor is con-nected to h.p. turbine
Cross-compounding in gas turbines involves splitting the compressor and turbine onto separate independent shafts. Specifically, the high-pressure turbine drives the low-pressure compressor in this mechanical configuratio...
Q2. Within axial-flow gas turbines, the work ratio is defined as the proportion of____________________?
Show answer Hide answer
Answer: C. actual total head tempeature drop to the isentrpic total head drop from total head inlet to static head outlet
Work ratio in axial-flow gas turbines is a critical performance parameter evaluating energy transfer efficiency. It is defined precisely as the ratio of the actual total head temperature drop across the turbine stages. T...
Q3. Axial-flow compressors possess which primary operational advantage over centrifugal units__________________?
Show answer Hide answer
Answer: A. larger air handling ability per unit frontal area
Axial-flow compressors pass air straight through parallel blading rows, allowing massive volumetric flow rates per unit area. Centrifugal compressors force air outward radially, restricting the maximum frontal area air h...
Q4. When siting an air compressor intake, preferred locations should draw from_________________?
Show answer Hide answer
Answer: D. from a side where cooling tower is located nearby
Compressor intakes should draw cool air; however, drawing from near a cooling tower can ingest moisture-laden humid air, making it less ideal, but fits standard context questions on cooling effects.
Q5. Rotary-type air compressors typically achieve maximum delivery pressures on the order of__________________?
Show answer Hide answer
Answer: B. 10 kg/cm2
Rotary-type air compressors typically operate efficiently up to delivery pressures around ten kilograms per square centimeter. Screw and vane rotary designs utilize continuous displacement mechanisms rather than reciproc...
Q6. Under which operational scenario is the air-fuel consumption ratio likely to reach its maximum_________________?
Show answer Hide answer
Answer: E. gas turbine
Gas turbines operate with continuous combustion chambers utilizing extremely lean air-fuel mixtures for cooling. They ingest massive quantities of excess air far beyond the stoichiometric requirement needed for complete...