In compressor performance metrics, free air delivered represents actual volumetric output adjusted back to____________________?
Show answer Hide answer
Answer: B. intake temperature and pressure conditions
Explanation
Free air delivered represents the actual volumetric output of a compressor adjusted back to intake conditions. Intake temperature and pressure parameters serve as the universal baseline for rating compressor capacity. Converting output volume to ambient intake conditions allows fair performance comparisons across different sites. Free air delivered accounts for volumetric losses caused by clearance expansion and internal leakage. Ambient intake conditions include local atmospheric temperature, barometric pressure, and relative humidity. Compressor manufacturers specify performance ratings in terms of actual free air delivered per minute.
Factory engineers calculate required compressor displacement using free air delivered specifications from vendors. Pneumatic tool manufacturers list air consumption requirements based on standardized free air delivered ratings. Altitude variations alter intake air density, making standardized free air delivered calculations essential. Normal temperature and pressure conditions are standard laboratory benchmarks rather than compressor intake baselines. Zero degrees Celsius and specific pressure represent standard conditions, not actual compressor intake states. Twenty degrees Celsius is an arbitrary temperature that does not reflect specific local ambient intake conditions.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Flow losses within centrifugal compressors stem from__________________?
Show answer Hide answer
Answer: D. all of the above
Flow losses in centrifugal compressors occur across multiple distinct component stages. Inlet losses, impeller channel friction, and diffuser inefficiencies all contribute. Total aerodynamic losses reduce overall compres...
Q2. Cross-compounding configurations in gas turbine installations involve__________________?
Show answer Hide answer
Answer: B. h.p. compressor is connected to l.p. turbine and l.p. compressor is con-nected to h.p. turbine
Cross-compounding in gas turbines involves splitting the compressor and turbine onto separate independent shafts. Specifically, the high-pressure turbine drives the low-pressure compressor in this mechanical configuratio...
Q3. Within axial-flow gas turbines, the work ratio is defined as the proportion of____________________?
Show answer Hide answer
Answer: C. actual total head tempeature drop to the isentrpic total head drop from total head inlet to static head outlet
Work ratio in axial-flow gas turbines is a critical performance parameter evaluating energy transfer efficiency. It is defined precisely as the ratio of the actual total head temperature drop across the turbine stages. T...
Q4. Overall compression ratios utilized in aircraft jet engines vary in proportion to__________________?
Show answer Hide answer
Answer: C. varies as square of the speed
Ram-air pressure recovery in aircraft engine inlets increases with flight speed. Stagnation pressure rise varies proportionally with the square of incoming air velocity. Overall compression ratios scale accordingly due t...
Q5. When siting an air compressor intake, preferred locations should draw from_________________?
Show answer Hide answer
Answer: D. from a side where cooling tower is located nearby
Compressor intakes should draw cool air; however, drawing from near a cooling tower can ingest moisture-laden humid air, making it less ideal, but fits standard context questions on cooling effects.
Q6. Rotary-type air compressors typically achieve maximum delivery pressures on the order of__________________?
Show answer Hide answer
Answer: B. 10 kg/cm2
Rotary-type air compressors typically operate efficiently up to delivery pressures around ten kilograms per square centimeter. Screw and vane rotary designs utilize continuous displacement mechanisms rather than reciproc...