Cross-compounding configurations in gas turbine installations involve__________________?
Show answer Hide answer
Answer: B. h.p. compressor is connected to l.p. turbine and l.p. compressor is con-nected to h.p. turbine
Explanation
Cross-compounding in gas turbines involves splitting the compressor and turbine onto separate independent shafts. Specifically, the high-pressure turbine drives the low-pressure compressor in this mechanical configuration arrangement. This split-shaft design allows different turbine spool sections to rotate at their optimal speeds. Gas turbine engines often utilize multiple turbine stages to extract energy across wide pressure drops. Mechanical independence between spools prevents compressor surge during rapid throttle transient maneuvers. Complex gearboxes or aerodynamic coupling links the separate turbine and compressor spool assemblies.
Marine propulsion gas turbines use cross-compounding to achieve high torque across varying vessel speeds. Large industrial power generation turbines utilize multi-spool layouts to optimize thermal efficiency. Aerospace turbofan engines frequently employ dual-spool architectures for superior performance at altitude. Option A pairs the high-pressure compressor with the high-pressure turbine on the same single shaft. Option C incorrectly claims that completely opposite mechanical shaft arrangements are identical in operation. Option D is wrong because cross-compounding specifically separates components rather than running entirely in series.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Integrating intercooling stages within gas turbine cycles yields____________________ ?
Show answer Hide answer
Answer: A. increase in net output but decrease in thermal efficiency
Intercoolers remove heat from compressed air between stages, reducing the specific volume and lowering subsequent compression work. Lower compression work requirements directly increase the net power output produced by t...
Q2. Closed-loop gas turbine cycles remain impractical for aircraft propulsion applications because_________________ ?
Show answer Hide answer
Answer: C. it requires cooling water for its operation
Closed-loop gas turbine cycles require external heat exchangers to reject thermal energy from the working fluid. This cooling process demands large amounts of cooling water to reduce fluid temperatures prior to compressi...
Q3. Superior thermal efficiencies in gas turbine systems are achieved through_________________?
Show answer Hide answer
Answer: A. closed cycle
Closed-cycle systems circulate a clean working fluid isolated from combustion contaminants. External heat addition allows the use of working fluids with superior thermodynamic properties. High working pressures throughou...
Q4. Axial-flow compressors possess which primary operational advantage over centrifugal units__________________?
Show answer Hide answer
Answer: A. larger air handling ability per unit frontal area
Axial-flow compressors pass air straight through parallel blading rows, allowing massive volumetric flow rates per unit area. Centrifugal compressors force air outward radially, restricting the maximum frontal area air h...
Q5. In compressor performance metrics, free air delivered represents actual volumetric output adjusted back to____________________?
Show answer Hide answer
Answer: B. intake temperature and pressure conditions
Free air delivered represents the actual volumetric output of a compressor adjusted back to intake conditions. Intake temperature and pressure parameters serve as the universal baseline for rating compressor capacity. Co...
Q6. Efficient generation of high power output in jet reaction engines requires fuel combustion within an environment of__________________?
Show answer Hide answer
Answer: C. compressed air
Jet engines require high oxygen mass flow rates to sustain continuous rapid combustion. Compressed air supplies the necessary oxygen density within the combustion chamber volume. Without compression, fuel would burn inef...