Superior thermal efficiencies in gas turbine systems are achieved through_________________?
Show answer Hide answer
Answer: A. closed cycle
Explanation
Closed-cycle systems circulate a clean working fluid isolated from combustion contaminants. External heat addition allows the use of working fluids with superior thermodynamic properties. High working pressures throughout the cycle enhance heat transfer and thermal efficiency. Open-cycle gas turbines ingest atmospheric air and exhaust combustion products directly. Closed-cycle systems require an external heat exchanger to warm the working fluid. Helium or other inert gases are often selected as working fluids in closed systems.
Advanced nuclear reactor designs couple with closed-cycle gas turbines for power generation. Closed cycles prevent blade erosion caused by atmospheric dust or corrosive combustion products. Industrial applications benefit from prolonged turbine life span and higher efficiencies. Open cycles suffer efficiency losses due to atmospheric air intake and exhaust discharge. Open-cycle systems cannot freely select optimal working fluids like helium or argon. Predictability is high in both cycles when thermodynamic principles are correctly applied.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Operating an air compressor at high geographic elevations causes it to ingest________________?
Show answer Hide answer
Answer: B. less power
Operating at high geographic elevations means encountering lower ambient atmospheric air density conditions. This reduced density lowers the mass flow rate of air ingested by the compressor unit. Since power input is pro...
Q2. If absolute fluid velocity (V), blade velocity (U), and relative velocity (Vr) incorporate subscripts i and o for inlet and outlet conditions, a rotary turbomachine exhibiting a reaction degree of unity satisfies______________?
Show answer Hide answer
Answer: A. Vi=V0B
The degree of reaction in a turbomachine is defined as the enthalpy drop across moving blades versus total stage drop. A reaction degree of unity means the entire static pressure drop occurs exclusively across the rotati...
Q3. Integrating intercooling stages within gas turbine cycles yields____________________ ?
Show answer Hide answer
Answer: A. increase in net output but decrease in thermal efficiency
Intercoolers remove heat from compressed air between stages, reducing the specific volume and lowering subsequent compression work. Lower compression work requirements directly increase the net power output produced by t...
Q4. Cross-compounding configurations in gas turbine installations involve__________________?
Show answer Hide answer
Answer: B. h.p. compressor is connected to l.p. turbine and l.p. compressor is con-nected to h.p. turbine
Cross-compounding in gas turbines involves splitting the compressor and turbine onto separate independent shafts. Specifically, the high-pressure turbine drives the low-pressure compressor in this mechanical configuratio...
Q5. Within axial-flow gas turbines, the work ratio is defined as the proportion of____________________?
Show answer Hide answer
Answer: C. actual total head tempeature drop to the isentrpic total head drop from total head inlet to static head outlet
Work ratio in axial-flow gas turbines is a critical performance parameter evaluating energy transfer efficiency. It is defined precisely as the ratio of the actual total head temperature drop across the turbine stages. T...
Q6. Axial-flow compressors possess which primary operational advantage over centrifugal units__________________?
Show answer Hide answer
Answer: A. larger air handling ability per unit frontal area
Axial-flow compressors pass air straight through parallel blading rows, allowing massive volumetric flow rates per unit area. Centrifugal compressors force air outward radially, restricting the maximum frontal area air h...