Operating an air compressor at high geographic elevations causes it to ingest________________?
Show answer Hide answer
Answer: B. less power
Explanation
Operating at high geographic elevations means encountering lower ambient atmospheric air density conditions. This reduced density lowers the mass flow rate of air ingested by the compressor unit. Since power input is proportional to mass flow rate, the required compressor power decreases accordingly. Atmospheric pressure and air density decrease significantly as elevation above sea level increases. Compressors volumetrically displace the same physical volume of air regardless of its surrounding density. Lower mass flow means fewer gas molecules are compressed per stroke, reducing mechanical work load.
Compressors installed in mountain mining operations require performance corrections for altitude variations. Aircraft pneumatic systems experience reduced mass output when operating at high cruising altitudes. Engineers must select appropriately sized compressor motors to account for local barometric conditions. Option A is incorrect because lower air density decreases rather than increases the power consumed. Option C is wrong because power consumption varies directly with changes in ambient air density. Option D is unnecessary since physical laws consistently dictate lower power draw at high altitudes.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Reciprocating compressor cylinder clearance spaces should be designed to be_________________?
Show answer Hide answer
Answer: B. as small as possible
Reciprocating compressor cylinder clearance spaces must be kept as small as mechanically possible. Minimizing clearance volume reduces the re-expansion of trapped high-pressure gas during the suction stroke. Smaller clea...
Q2. Multi-stage compressors approach isothermal compression behavior through the use of_________________?
Show answer Hide answer
Answer: C. by running compressor at very slow speed
Running a compressor at very slow speeds helps approach isothermal conditions by allowing more time for heat transfer.
Q3. Aviation jet propulsion systems utilize kerosene (paraffin) primarily due to its_________________?
Show answer Hide answer
Answer: D. A. and C. above
Kerosene possesses a high calorific value releasing abundant thermal energy per unit mass. Its low freezing point prevents fuel line blockage during high-altitude cold flights. Combining these traits makes kerosene the d...
Q4. Integrating intercooling stages within gas turbine cycles yields____________________ ?
Show answer Hide answer
Answer: A. increase in net output but decrease in thermal efficiency
Intercoolers remove heat from compressed air between stages, reducing the specific volume and lowering subsequent compression work. Lower compression work requirements directly increase the net power output produced by t...
Q5. Closed-loop gas turbine cycles remain impractical for aircraft propulsion applications because_________________ ?
Show answer Hide answer
Answer: C. it requires cooling water for its operation
Closed-loop gas turbine cycles require external heat exchangers to reject thermal energy from the working fluid. This cooling process demands large amounts of cooling water to reduce fluid temperatures prior to compressi...
Q6. Superior thermal efficiencies in gas turbine systems are achieved through_________________?
Show answer Hide answer
Answer: A. closed cycle
Closed-cycle systems circulate a clean working fluid isolated from combustion contaminants. External heat addition allows the use of working fluids with superior thermodynamic properties. High working pressures throughou...