Under which operational scenario is the air-fuel consumption ratio likely to reach its maximum_________________?
Show answer Hide answer
Answer: E. gas turbine
Explanation
Gas turbines operate with continuous combustion chambers utilizing extremely lean air-fuel mixtures for cooling. They ingest massive quantities of excess air far beyond the stoichiometric requirement needed for complete fuel oxidation. Consequently, the operating air-fuel consumption ratio reaches its maximum levels compared to reciprocating engines. Stoichiometric air-fuel ratios provide exactly enough oxygen to burn fuel completely without excess remnants. Reciprocating petrol engines operate near stoichiometric ratios, while diesel engines run lean with excess air. Gas turbines require vast excess air flows primarily to dilute combustion temperatures protecting metal turbine blades.
Aviation gas turbines operate across wide altitude ranges requiring robust lean-burn combustion stability. High air-fuel ratios help limit thermal fatigue and extend the operational lifespan of expensive turbine blades. Combustion engineers design advanced fuel nozzles to maintain stable ignition within high-velocity airflow streams. Option A two-stroke engines typically run rich or near stoichiometric mixtures with limited excess air. Option B four-stroke petrol engines operate on relatively narrow air-fuel ratio bands around stoichiometric limits. Option C four-stroke diesel engines run lean, but their air-fuel ratios remain much lower than gas turbines.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Efficient generation of high power output in jet reaction engines requires fuel combustion within an environment of__________________?
Show answer Hide answer
Answer: C. compressed air
Jet engines require high oxygen mass flow rates to sustain continuous rapid combustion. Compressed air supplies the necessary oxygen density within the combustion chamber volume. Without compression, fuel would burn inef...
Q2. Overall compression ratios utilized in aircraft jet engines vary in proportion to__________________?
Show answer Hide answer
Answer: C. varies as square of the speed
Ram-air pressure recovery in aircraft engine inlets increases with flight speed. Stagnation pressure rise varies proportionally with the square of incoming air velocity. Overall compression ratios scale accordingly due t...
Q3. When siting an air compressor intake, preferred locations should draw from_________________?
Show answer Hide answer
Answer: D. from a side where cooling tower is located nearby
Compressor intakes should draw cool air; however, drawing from near a cooling tower can ingest moisture-laden humid air, making it less ideal, but fits standard context questions on cooling effects.
Q4. Mining operations predominantly rely on which primary source of motive power___________________?
Show answer Hide answer
Answer: B. compressed air
Mining operations predominantly rely on compressed air to power underground pneumatic tools safely. Compressed air eliminates electrical spark hazards, preventing explosive mine gas ignitions underground. Pneumatic drill...
Q5. In jet engines, where are the products of combustion directed after flowing through the gas turbine_______________?
Show answer Hide answer
Answer: C. discharge nozzle
Combustion gases expand through the turbine section to extract mechanical compressor work. The remaining high-pressure exhaust is directed into a converging discharge nozzle. Accelerating these gases through the nozzle c...
Q6. Identify the accurate technical statement?
Show answer Hide answer
Answer: E. thrust in turbo-jet is produced by nozzle exit gases
Thrust in a turbojet engine is produced by expanding hot gases through a rear nozzle. Newtonian reaction forces propel the aircraft forward as high-velocity gases escape backward. Exhaust gas momentum creates the forward...