Counter-flow heat exchangers are characterized by_________________?
Show answer Hide answer
Answer: B. both the fluids at inlet are in their hot¬test state
Explanation
In counter-flow heat exchangers, the two fluid streams travel in opposite directions through the assembly. Consequently, the hot fluid enters at its maximum temperature while the cold fluid enters at its lowest. This opposing entry configuration creates the highest possible logarithmic mean temperature difference for heat transfer. Counter-flow designs achieve superior thermal effectiveness compared to parallel-flow arrangements of similar physical size. The temperature profiles of both fluids can cross, allowing the cold fluid to surpass the hot fluid exit temperature. Thermodynamically, counter-flow configurations approach reversible heat transfer conditions much more closely than others.
Power plant steam condensers utilize counter-flow layouts to maximize thermal efficiency and energy recovery. Chemical reactors employ counter-flow heat exchangers to maintain precise temperature control during exothermic reactions. HVAC systems use counter-flow configurations in air-to-air heat recovery ventilators to save building energy. Having both fluids at their coldest state at the inlet violates fundamental counter-flow fluid routing principles. Fluids exit at opposing temperature extremes rather than sharing identical hottest states at the boundary exits. Design flexibility is bounded by thermodynamic laws governing continuous steady-state heat exchanger fluid streams.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Preventing moisture vapor pressure from penetrating insulation requires__________________ ?
Show answer Hide answer
Answer: D. a vapour seal
A vapor seal provides an impermeable barrier that stops moisture vapor pressure from migrating into insulation pores. Without a protective seal, warm moisture vapor will diffuse into cold insulation and condense into liq...
Q2. Metals function as good thermal conductors because________________?
Show answer Hide answer
Answer: A. their atoms collide frequently
Metals are good thermal conductors because they contain a high concentration of free electrons that rapidly transport thermal energy.
Q3. Radiant heat exchange is primarily governed by___________________?
Show answer Hide answer
Answer: D. all of the above
Radiant heat exchange is governed by the absolute temperatures of the interacting physical bodies. The surface type and material emittance strongly influence how much thermal radiation is emitted. Geometric view factors...
Q4. Total emissive power is defined as the aggregate radiation emitted by a black body per unit_______________?
Show answer Hide answer
Answer: D. time
Emissive power quantifies emitted thermal radiation relative to both physical surface area and operating time. Dividing total radiated energy by area and time yields the standard heat flux expression. Option D correctly...
Q5. A thermocouple's time constant is defined as_______________?
Show answer Hide answer
Answer: C. the time taken to attain 63.2% of the value of initial temperature difference
The time constant of a thermocouple defines the duration required to reach 63.2 percent of an initial temperature step change. This mathematical percentage corresponds to one minus the reciprocal of Euler's constant in e...
Q6. Stefan’s law states that total black body radiation per unit area per second is proportional to____________________?
Show answer Hide answer
Answer: D. t
Stefan's law states that total black body radiation energy is proportional to the fourth power of absolute temperature.