Skip to main content
Sarkari MCQs Government Exam Question Bank
Menu
Question no. 57025

Industrial water gas is manufactured via ___________________ ?

Select your answer for: Industrial water gas is manufactured via ___________________ ?
Show answer

Answer: B. passing steam over incandescent coke

Explanation

Water gas is produced industrially by passing steam over hot incandescent coke at high temperatures. This endothermic chemical reaction produces a clean synthesis gas composed primarily of carbon monoxide and hydrogen. The process requires alternating air blasts to keep the coke bed sufficiently incandescent for the steam reaction. Coke is a carbon-rich solid fuel derived from the destructive distillation of bituminous coal in ovens. Water gas serves as an important industrial fuel and a chemical feedstock for producing synthetic organic compounds. The reaction stoichiometry balances carbon and steam to maximize hydrogen and carbon monoxide gas yields.

Option A describes carbonisation which yields coal gas and coke rather than industrial water gas. Option C describes producer gas manufacture by passing air and steam through waste coal beds. Option D outlines producer gas generation methods involving mixed air and steam blasts over carbon fuel.

Subject
Engineering
Topic
—
Difficulty
medium

Related questions

Q1. Engine detonation is instigated by the presence of which unstable chemical species______________________?

Select your answer for: Engine detonation is instigated by the presence of which unstable chemical species______________________?
Show answer

Answer: A. peroxides, aldehydes and ketones

Engine detonation is promoted by the buildup of unstable intermediate chemical species like peroxides. Peroxides, aldehydes, and ketones form rapidly in the unburned end-gas ahead of the flame front. These reactive chemi...

Q2. Volumetric efficiency is mathematically defined as_____________________?

Select your answer for: Volumetric efficiency is mathematically defined as_____________________?
Show answer

Answer: B. the ratio of the air actually delivered to the amount of piston displacement

Volumetric efficiency compares actual delivered air volume to swept displacement volume. It quantifies how successfully a compressor fills its cylinder during suction strokes. Losses from clearance volume and valve restr...

Q3. Drop forging die blocks contain carbon percentages falling on the order of_________________?

Select your answer for: Drop forging die blocks contain carbon percentages falling on the order of_________________?
Show answer

Answer: C. 0.6 to 0.7%

Drop forging die blocks require a balance of toughness and wear resistance, typically provided by medium-high carbon steels containing zero point six to zero point seven percent carbon. This specific carbon concentration...

Q4. Differential U-tube manometers are applied to measure___________________?

Select your answer for: Differential U-tube manometers are applied to measure___________________?
Show answer

Answer: D. difference of pressure between two points

A differential U-tube manometer measures the pressure difference between two separate points in a fluid system. The fluid level displacement inside the U-tube corresponds directly to the applied pressure gradient. It eli...

Q5. Material ductility is formally described as__________________?

Select your answer for: Material ductility is formally described as__________________?
Show answer

Answer: C. ability to undergo large permanent deformations in tension

Ductility measures a material's capacity to stretch plastically under pulling forces. Tensile stress pulls atoms apart while allowing permanent elongation without fracture. Ductile materials can be drawn into thin wires...

Q6. Ductile cast iron exhibits___________________?

Select your answer for: Ductile cast iron exhibits___________________?
Show answer

Answer: D. is produced by small additions of magnesium (or creium) in the ladle. Graphite is in nodular or spheroidal form and is well dispersed throughout the material

Ductile cast iron is produced by inoculating molten iron with magnesium or cerium, causing the graphite to form microscopic nodules that improve toughness. The nodular or spheroidal shape of the graphite particles preven...

New!

Mock Test System is now available!

Prepare for your exam with interactive mock tests. Select your subjects, attempt 100 random MCQs against the clock, and see exactly where you stand.

Start Mock Test