Skip to main content
Sarkari MCQs Government Exam Question Bank
Menu
Question no. 57023

Drop forging die blocks contain carbon percentages falling on the order of_________________?

Select your answer for: Drop forging die blocks contain carbon percentages falling on the order of_________________?
Show answer

Answer: C. 0.6 to 0.7%

Explanation

Drop forging die blocks require a balance of toughness and wear resistance, typically provided by medium-high carbon steels containing zero point six to zero point seven percent carbon. This specific carbon concentration allows the die material to be heat-treated to high hardness while retaining structural impact strength. Lower carbon levels would produce dies that deform too easily under repeated high-impact forging loads. Drop forging involves slamming metal billets into cavity dies under massive mechanical or hydraulic hammer forces. Die blocks must endure extreme thermal cycling, mechanical shock, and abrasive wear during high-speed production runs. Alloy tool steels used for dies often include chromium, nickel, and molybdenum to enhance overall durability.

Carbon percentages between zero point one and zero point two percent are too soft for high-stress drop forging applications. Extremely high carbon ranges above zero point nine percent make the die material too brittle to withstand impact shocks. Choosing incorrect carbon ranges leads to rapid die wear, plastic deformation, or sudden catastrophic tooling failure.

Subject
Engineering
Topic
—
Difficulty
medium

Related questions

Q1. Thermal efficiency and work ratios of gas turbine systems can be elevated by_____________________?

Select your answer for: Thermal efficiency and work ratios of gas turbine systems can be elevated by_____________________?
Show answer

Answer: E. all of the above

Techniques like intercooling regeneration water injection and reheating all contribute to improving gas turbine efficiency. Intercooling reduces compressor work while regeneration captures exhaust heat to preheat combust...

Q2. Compression-ignition engines compared to spark-ignition engines demand______________________?

Select your answer for: Compression-ignition engines compared to spark-ignition engines demand______________________?
Show answer

Answer: A. bigger flywheel

Compression-ignition diesel engines produce severe torque fluctuations and high peak cylinder pressures during power strokes. To smooth out these rotational irregularities and maintain steady speed, diesel engines requir...

Q3. Engine detonation is instigated by the presence of which unstable chemical species______________________?

Select your answer for: Engine detonation is instigated by the presence of which unstable chemical species______________________?
Show answer

Answer: A. peroxides, aldehydes and ketones

Engine detonation is promoted by the buildup of unstable intermediate chemical species like peroxides. Peroxides, aldehydes, and ketones form rapidly in the unburned end-gas ahead of the flame front. These reactive chemi...

Q4. Industrial water gas is manufactured via ___________________ ?

Select your answer for: Industrial water gas is manufactured via ___________________ ?
Show answer

Answer: B. passing steam over incandescent coke

Water gas is produced industrially by passing steam over hot incandescent coke at high temperatures. This endothermic chemical reaction produces a clean synthesis gas composed primarily of carbon monoxide and hydrogen. T...

Q5. Dowmetal alloy compositions contain____________________?

Select your answer for: Dowmetal alloy compositions contain____________________?
Show answer

Answer: D. 90% magnesium and 9% aluminium with some copper

Dowmetal alloys are a family of lightweight magnesium-based engineering materials containing roughly ninety percent magnesium. Approximately nine percent aluminum is alloyed with the magnesium base to enhance strength an...

Q6. Differential U-tube manometers are applied to measure___________________?

Select your answer for: Differential U-tube manometers are applied to measure___________________?
Show answer

Answer: D. difference of pressure between two points

A differential U-tube manometer measures the pressure difference between two separate points in a fluid system. The fluid level displacement inside the U-tube corresponds directly to the applied pressure gradient. It eli...

New!

Mock Test System is now available!

Prepare for your exam with interactive mock tests. Select your subjects, attempt 100 random MCQs against the clock, and see exactly where you stand.

Start Mock Test