Indicated work output per unit mass of delivered air represents___________________?
Show answer Hide answer
Answer: C. not affected by clearance volume
Explanation
Indicated work output per unit mass depends strictly on system pressure limits rather than volume. The clearance volume does not alter the fundamental work calculation per unit mass delivered by the compressor. Theoretical thermodynamic cycles show that indicated work remains completely independent of clearance volume sizing. Clearance volume represents the trapped gas space remaining in a cylinder when the piston reaches top dead center. Indicated work measures the actual energy transferred to the working fluid during compression and expansion strokes. Volumetric efficiency is heavily influenced by clearance volume, but indicated work per unit mass delivered is not.
Proportional relationships apply to clearance volume when calculating volumetric efficiency rather than indicated work output. Inverse proportionality describes how clearance volume affects volumetric capacity instead of specific work per unit mass. Stating that work is greatly affected confuses work output metrics with volumetric efficiency considerations in compressors.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Thermodynamic efficiency criteria for rotary compressors are based upon_________________?
Show answer Hide answer
Answer: A. isentropic compression
Rotary and dynamic compressors use isentropic compression as the standard thermodynamic baseline for efficiency calculations. Engineers apply the isentropic process model because it represents reversible and adiabatic op...
Q2. Gas turbine pressure ratios represent the mathematical proportion of____________________?
Show answer Hide answer
Answer: B. highest pressure to exhaust pressure
Gas turbine pressure ratios measure the highest cycle pressure relative to the exhaust pressure. The compressor discharge pressure represents the maximum pressure point within the Brayton cycle loop. Dividing this maximu...
Q3. How do peak combustion pressures in gas turbines compare against standard internal combustion engines_________________?
Show answer Hide answer
Answer: B. less
Due to continuous flow and turbine material limits peak pressures in gas turbines are generally lower. Reciprocating engines seal the combustion chamber intermittently allowing extreme localized pressure spikes during po...
Q4. Fuel consumption rates within gas turbine engines are primarily dictated by___________________?
Show answer Hide answer
Answer: A. low.er heating value
Fuel consumption calculations in gas turbines are based on the lower heating value since exhaust moisture remains in vapor form. Gas turbine exhaust temperatures are extremely high, preventing any condensation of the wat...
Q5. Net work input required by a compressor responds to increases in cylinder clearance volume by_____________________?
Show answer Hide answer
Answer: C. remains same
The net work input per cycle for a reciprocating compressor depends on suction and discharge pressures. Clearence volume traps high-pressure gas that expands during the return stroke, re-expanding to suction pressure. Th...
Q6. The primary objective of implementing gas turbine reheating is to__________________?
Show answer Hide answer
Answer: C. increase power output
Reheating gas between turbine stages increases the specific power output of the gas turbine system. Injecting additional thermal energy expands the working fluid further and boosts overall turbine work production. This p...