Thermodynamic efficiency criteria for rotary compressors are based upon_________________?
Show answer Hide answer
Answer: A. isentropic compression
Explanation
Rotary and dynamic compressors use isentropic compression as the standard thermodynamic baseline for efficiency calculations. Engineers apply the isentropic process model because it represents reversible and adiabatic operation conditions. Comparing real compressor performance against this ideal baseline provides a consistent measure of mechanical perfection. An isentropic process combines the principles of reversibility and constant entropy throughout the entire compression cycle. Real compressors experience internal friction and aerodynamic losses that cause entropy levels to increase steadily. The thermodynamic efficiency is calculated as the ratio of ideal isentropic work to actual measured work input.
Isothermal compression assumes constant temperature, which requires infinite heat transfer rates during the compression process. Polytropic compression accounts for heat loss or gain, but it varies by machine design rather than serving as a fixed baseline. Options involving isothermal or polytropic processes do not serve as the universal thermodynamic efficiency standard for rotary machines.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Identify the incorrect assertion from the list ?
Show answer Hide answer
Answer: D. axial flow compressors are bigger in diameter compared to centrifugal type
Axial flow compressors have smaller diameters compared to centrifugal compressors of equivalent flow capacity. The radial design of centrifugal compressors inherently requires a much larger overall outer casing diameter....
Q2. Operational pressure ratios in standard gas turbines typically fall within the order of____________________?
Show answer Hide answer
Answer: C. 8 : 1
Standard industrial gas turbines operate effectively within overall pressure ratios typically ranging from 8 to 1 to 12 to 1. Operating at an 8 to 1 pressure ratio balances thermal efficiency gains against material tempe...
Q3. What typical propulsive efficiency values are achieved during practical operation _______________?
Show answer Hide answer
Answer: C. 60%
Practical aircraft engines achieve propulsive efficiencies around sixty percent during standard cruising operations. Losses in both the intake and exhaust streams prevent ideal propulsion systems from reaching hundred pe...
Q4. How do peak combustion pressures in gas turbines compare against standard internal combustion engines_________________?
Show answer Hide answer
Answer: B. less
Due to continuous flow and turbine material limits peak pressures in gas turbines are generally lower. Reciprocating engines seal the combustion chamber intermittently allowing extreme localized pressure spikes during po...
Q5. Ram-jet reaction engines operate by__________________?
Show answer Hide answer
Answer: B. is not self-operating at zero^flight speed
Ramjet engines rely entirely on high forward flight speed to compress incoming air through forward-facing diffuser inlets. At zero flight speed, the ramjet cannot generate the necessary internal air compression required...
Q6. Indicated work output per unit mass of delivered air represents___________________?
Show answer Hide answer
Answer: C. not affected by clearance volume
Indicated work output per unit mass depends strictly on system pressure limits rather than volume. The clearance volume does not alter the fundamental work calculation per unit mass delivered by the compressor. Theoretic...