How does the center of pressure position relate to the centroid (e.g.) on a submerged surface___________________?
Show answer Hide answer
Answer: B. below it
Explanation
Hydrostatic pressure increases linearly with vertical depth below the free liquid surface. Greater pressure near the bottom shifts the resultant force vector downward. The center of pressure accounts for this distributed load, placing it beneath the centroid. The centroid represents the geometric center of the submerged area. Center of pressure calculation involves the area moment of inertia divided by depth. Hydrostatic pressure formula proves that force intensity grows with depth.
Civil engineers design dams and gates accounting for this downward force shift. Submarine hulls experience uneven pressure distributions across their submerged vertical profiles. Understanding pressure centers prevents structural failure in water retaining walls. Placing the pressure center above the centroid contradicts basic fluid statics principles. A uniform pressure distribution would be required to align them at the same point. The center of pressure is never above the centroid for submerged vertical surfaces.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Select the incorrect statement among the options?
Show answer Hide answer
Answer: D. Viscosity of liquids is appreciably affected by change in pressure
Viscosity measures a fluid resistance to gradual deformation by shear or tensile stress forces. The viscosity of liquids stems primarily from strong cohesive intermolecular forces between fluid molecules. Unlike gases, l...
Q2. A rudimentary turbojet engine fundamentally functions as_________________?
Show answer Hide answer
Answer: B. gas-turbine engine equipped with a propulsive nozzle and diffuse*
A rudimentary turbojet engine operates by ingesting, compressing, heating, and expanding air through a nozzle. It consists fundamentally of an inlet diffuser, rotary compressor, combustion chamber, and turbine. Expanding...
Q3. With atmospheric pressure at 1.03 kg/cm and vapour pressure at 0.03 kg/cm, what is the resulting air pressure_____________________ ?
Show answer Hide answer
Answer: C. 1.00 kg/cm2
Dalton's law of partial pressures states that total pressure equals the sum of individual component pressures. Subtracting the vapour pressure from total atmospheric pressure isolates the resulting dry air pressure value...
Q4. Carbonization (coking) of coal represents the procedure of________________________?
Show answer Hide answer
Answer: C. strongly heating coal continuously for about 48 hours in the absence of air in a closed vessel
Carbonization requires heating coal strongly for extended periods in closed vessels without any oxygen present. This thermal treatment drives off volatile matter and moisture, leaving behind a carbon-rich solid residue....
Q5. As the polytropic compression index ‘n’ diminishes, compressor volumetric efficiency will___________________?
Show answer Hide answer
Answer: B. decrease
Polytropic compression index 'n' represents the expansion and compression behavior of gases inside compressors. When the index 'n' diminishes, the expansion curve of trapped clearance gas becomes flatter. This increased...
Q6. Elevating turbine entry temperatures impacts the thermal efficiency of gas turbines at optimal pressure ratios by_____________________?
Show answer Hide answer
Answer: A. increases
Higher turbine entry temperatures increase thermal efficiency because more heat is added at elevated temperatures. Raising the peak cycle temperature improves the overall thermodynamic availability of the working fluid i...