Elevating turbine entry temperatures impacts the thermal efficiency of gas turbines at optimal pressure ratios by_____________________?
Show answer Hide answer
Answer: A. increases
Explanation
Higher turbine entry temperatures increase thermal efficiency because more heat is added at elevated temperatures. Raising the peak cycle temperature improves the overall thermodynamic availability of the working fluid inside the system. Greater thermal energy conversion directly increases the useful power output generated by the gas turbine engine. Thermal efficiency in a Brayton cycle depends heavily upon the turbine inlet temperature and pressure ratio parameters. Materials science advancements enable modern turbine blades to withstand extreme temperatures exceeding standard metallurgical melting limits safely. Cooling techniques like internal air passages protect turbine components from degradation during high temperature operational cycles.
Decreasing temperature would reduce thermal efficiency by lowering the heat addition peak of the thermodynamic cycle. Maintaining the same temperature fails to capture the thermodynamic gains associated with elevated heat input levels. The efficiency changes monotonically with temperature and does not exhibit a non-linear reversal under optimal ratios.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. How does the center of pressure position relate to the centroid (e.g.) on a submerged surface___________________?
Show answer Hide answer
Answer: B. below it
Hydrostatic pressure increases linearly with vertical depth below the free liquid surface. Greater pressure near the bottom shifts the resultant force vector downward. The center of pressure accounts for this distributed...
Q2. Plain carbon steel is classified as_______________?
Show answer Hide answer
Answer: C. an alloy of iron and carbon with varying quantities of phosphorus and sulphur
Plain carbon steel is an alloy consisting primarily of iron and carbon. Controlled minor quantities of phosphorus and sulfur are also present from refining. Alloying elements like manganese and silicon are included in sm...
Q3. Carbonization (coking) of coal represents the procedure of________________________?
Show answer Hide answer
Answer: C. strongly heating coal continuously for about 48 hours in the absence of air in a closed vessel
Carbonization requires heating coal strongly for extended periods in closed vessels without any oxygen present. This thermal treatment drives off volatile matter and moisture, leaving behind a carbon-rich solid residue....
Q4. Actual compression polytropic curves trace___________________?
Show answer Hide answer
Answer: D. in between isothermal and adiabatic
Actual polytropic compression experiences some heat transfer during the process. Isothermal processes involve complete heat rejection while adiabatic processes have zero heat transfer. Polytropic paths represent real com...
Q5. Compressor diffuser sections are incorporated to_____________________?
Show answer Hide answer
Answer: D. convert kinetic energy into pressure energy
Compressor diffuser sections are specifically designed to decelerate high-speed fluid flow. Converting kinetic energy into static pressure energy is the primary diffuser function. Expanding cross-sectional area causes fl...
Q6. A jet reaction engine operates based on the conservation principle of____________________?
Show answer Hide answer
Answer: D. linear momentum
Jet reaction engines operate by the fundamental conservation of linear momentum in fluid dynamics. High-speed combustion gases are forcefully expelled backward through the exhaust nozzle of the engine. This rapid expulsi...