Skip to main content
Sarkari MCQs Government Exam Question Bank
Menu
Question no. 56854

With atmospheric pressure at 1.03 kg/cm and vapour pressure at 0.03 kg/cm, what is the resulting air pressure_____________________ ?

Select your answer for: With atmospheric pressure at 1.03 kg/cm and vapour pressure at 0.03 kg/cm, what is the resulting air pressure_____________________ ?
Show answer

Answer: C. 1.00 kg/cm2

Explanation

Dalton's law of partial pressures states that total pressure equals the sum of individual component pressures. Subtracting the vapour pressure from total atmospheric pressure isolates the resulting dry air pressure value. Subtracting zero point zero three from one point zero three yields exactly one point zero zero kilograms. Atmospheric pressure represents the combined force exerted by overlying air and water vapour molecules. Vapour pressure is the partial pressure exerted by water vapour present in humid air mixtures. Dalton's law allows engineers to analyze gas-vapour mixtures by treating each component independently.

Air conditioning and ventilation system designers calculate partial pressures to control indoor humidity levels. Meteorologists analyze atmospheric vapour pressures to predict weather front formations and precipitation events. Pneumatic equipment performance depends on understanding ambient air composition and moisture partial pressures. One point zero three kilograms represents total atmospheric pressure without subtracting the vapour pressure. One point zero six kilograms incorrectly adds the vapour pressure to total atmospheric pressure levels. Zero point five three kilograms is an erroneous arithmetic calculation unrelated to the partial pressure formula.

Subject
Engineering
Topic
—
Difficulty
medium

Related questions

Q1. Pneumatic air compressor output can be regulated via____________________?

Select your answer for: Pneumatic air compressor output can be regulated via____________________?
Show answer

Answer: D. any one of the above

Pneumatic air compressor output can be regulated using multiple control strategies. Throttle control, clearance pockets, and blow-off valves all adjust delivered air volume. Operators select regulation methods based on d...

Q2. An idealized clearance-included reciprocating compressor cycle on a P-V chart is defined by which processes_______________?

Select your answer for: An idealized clearance-included reciprocating compressor cycle on a P-V chart is defined by which processes_______________?
Show answer

Answer: B. two adiabatic and two isobaric

An ideal reciprocating compressor with clearance involves two constant-pressure suction and discharge strokes. The cycle also includes two isentropic or adiabatic compression and expansion processes without heat transfer...

Q3. Select the incorrect statement among the options?

Select your answer for: Select the incorrect statement among the options?
Show answer

Answer: D. Viscosity of liquids is appreciably affected by change in pressure

Viscosity measures a fluid resistance to gradual deformation by shear or tensile stress forces. The viscosity of liquids stems primarily from strong cohesive intermolecular forces between fluid molecules. Unlike gases, l...

Q4. How does the center of pressure position relate to the centroid (e.g.) on a submerged surface___________________?

Select your answer for: How does the center of pressure position relate to the centroid (e.g.) on a submerged surface___________________?
Show answer

Answer: B. below it

Hydrostatic pressure increases linearly with vertical depth below the free liquid surface. Greater pressure near the bottom shifts the resultant force vector downward. The center of pressure accounts for this distributed...

Q5. Plain carbon steel is classified as_______________?

Select your answer for: Plain carbon steel is classified as_______________?
Show answer

Answer: C. an alloy of iron and carbon with varying quantities of phosphorus and sulphur

Plain carbon steel is an alloy consisting primarily of iron and carbon. Controlled minor quantities of phosphorus and sulfur are also present from refining. Alloying elements like manganese and silicon are included in sm...

Q6. Carbonization (coking) of coal represents the procedure of________________________?

Select your answer for: Carbonization (coking) of coal represents the procedure of________________________?
Show answer

Answer: C. strongly heating coal continuously for about 48 hours in the absence of air in a closed vessel

Carbonization requires heating coal strongly for extended periods in closed vessels without any oxygen present. This thermal treatment drives off volatile matter and moisture, leaving behind a carbon-rich solid residue....

New!

Mock Test System is now available!

Prepare for your exam with interactive mock tests. Select your subjects, attempt 100 random MCQs against the clock, and see exactly where you stand.

Start Mock Test