Duralumin alloy composition consists of___________________?
Show answer Hide answer
Answer: A. 94% aluminium, 4% copper and 0.5% Mn, Mg, Si and Fe
Explanation
Duralumin is a prominent precipitation-hardenable aluminum alloy containing approximately ninety-four percent aluminum. Four percent copper is added as the primary alloying element to enable significant strength enhancement via heat treatment. Fractional amounts around zero point five percent of manganese, magnesium, silicon, and iron are included for property control. Precipitation hardening involves solution heat treatment, quenching, and artificial aging to form strengthening micro-particles. Duralumin revolutionized aviation engineering by providing steel-like strength at a fraction of the structural weight. Copper alloying increases strength significantly but can reduce corrosion resistance if protective claddings are omitted.
Early twentieth-century aircraft fuselages and structural wing ribs were constructed extensively using Duralumin alloys. Structural engineers select Duralumin for applications demanding high strength-to-weight ratios in aerospace frames. Modern aluminum-lithium and advanced composites have largely succeeded Duralumin in supersonic aerospace structures. Option A correctly identifies the standard metallurgical composition percentages for Duralumin aluminum alloy. Compositions featuring forty percent copper are erroneous and do not represent standard structural aluminum alloys. Magnesium-dominant compositions describe lightweight magnesium casting alloys rather than aluminum-based Duralumin.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. A trussed structural framework is statically determinate (perfect) when its member count equals_________________?
Show answer Hide answer
Answer: A. 2n-3
A pin-jointed plane truss requires a specific mathematical relationship between members and joints. The equation two joints minus three ensures structural rigidity without redundancy. This formula defines a statically de...
Q2. A heavy ladder supported on a floor against a vertical wall may lose equilibrium if____________________?
Show answer Hide answer
Answer: C. the floor and wall both are smooth surfaces
If both the floor and the wall are perfectly smooth, no frictional forces can exist to oppose sliding, causing the ladder to lose equilibrium and slip. Static equilibrium requires balancing horizontal and vertical forces...
Q3. A flexible cable suspended between two supports at identical elevations with minimal sag approximates the geometric curve of____________________?
Show answer Hide answer
Answer: B. parabola
A flexible cable carrying a uniformly distributed load along its horizontal span takes the shape of a parabola. When suspension bridges support deck loads uniformly along the horizontal axis, cables form parabolic curves...
Q4. A particle moves rectilinearly such that distance (x) traveled in t seconds obeys x = t2 (t – 4). Its resulting acceleration is expressed by the formula __________________?
Show answer Hide answer
Answer: C. 6f-8
Acceleration is the second time derivative of the position displacement equation. Differentiating x equals t cubed minus four t squared once yields velocity. Differentiating velocity yields the final acceleration express...
Q5. Constantan, an alloy widely used in thermoelectric sensors, consists of a combination of__________________?
Show answer Hide answer
Answer: D. copper and nickel
Constantan is a copper-nickel alloy characterized by a low coefficient of thermal expansion and stable electrical resistance. Combining copper and nickel in specific proportions creates a solid solution alloy with unique...
Q6. Lami’s theorem dictates that___________________?
Show answer Hide answer
Answer: D. if three forces acting at a point are in equilibrium, each force is proportional to the sine of the angle between the other two
Lami's theorem states that if three coplanar forces acting at a point are in static equilibrium. Each force is directly proportional to the sine of the angle between the other two forces. This trigonometric relationship...