Skip to main content
Sarkari MCQs Government Exam Question Bank
Menu
Question no. 55836

From ground-level point P, the angle of elevation to a tower's summit is 30°. Given a tower height of 100 m, what is the distance from point P to the base of the tower:_________?

Select your answer for: From ground-level point P, the angle of elevation to a tower's summit is 30°. Given a tower height of 100 m, what is the distance from point P to the base of the tower:_________?
Show answer

Answer: C. 173 m

Explanation

Trigonometric ratios relate the angles of a right triangle to the lengths of its sides. The tangent of thirty degrees equals the tower height divided by the ground distance. Dividing one hundred by the tangent of thirty degrees gives approximately 173 meters. Tangent is the ratio of the opposite side length to the adjacent side length. The exact value of the tangent of thirty degrees is one over the square root of three. Right triangle trigonometry is essential for measuring inaccessible heights and long distances.

Surveyors use trigonometric leveling instruments to determine heights of mountains and tall buildings. Navigation systems rely on angular measurements and triangulation to locate positions on Earth. Construction engineers calculate sight lines and structural clearances using basic trigonometric principles. Option 149 m underestimates the calculated distance resulting from the trigonometric tangent formula. Option 156 m is an incorrect numerical approximation derived from flawed arithmetic steps. Option 200 m overestimates the distance by failing to apply the correct angle ratio.

Subject
Mathematics
Category
Mathematics
Topic
—
Difficulty
medium

Related questions

Q1. Ascertain the H.C.F of 4 * 27 * 3125, 8 * 9 * 25 * 7, and 16 * 81 * 5 * 11 * 49___________?

Select your answer for: Ascertain the H.C.F of 4 * 27 * 3125, 8 * 9 * 25 * 7, and 16 * 81 * 5 * 11 * 49___________?
Show answer

Answer: A. 180

Each given expression is first broken down into its fundamental prime factor components. The highest common factor is found by selecting the lowest exponent for shared prime factors. Multiplying the lowest prime powers t...

Q2. Drawing two cards successively with replacement from a standard deck, what is the probability of getting a red card first and a king second_________?

Select your answer for: Drawing two cards successively with replacement from a standard deck, what is the probability of getting a red card first and a king second_________?
Show answer

Answer: A. 1/26

Calculating the probability of drawing a red card gives one half from the deck. Calculating the probability of drawing a king with replacement gives one thirteenth. Multiplying these independent probabilities together yi...

Q3. Five bells toll together initially and subsequently ring at intervals of 5, 10, 15, 20, and 25 seconds respectively. After what interval will they next toll simultaneously?

Select your answer for: Five bells toll together initially and subsequently ring at intervals of 5, 10, 15, 20, and 25 seconds respectively. After what interval will they next toll simultaneously?
Show answer

Answer: A. 5 min

Finding when bells toll together requires calculating the least common multiple of their intervals. The least common multiple of five, ten, fifteen, twenty, and twenty-five is three hundred seconds. Converting three hund...

Q4. Two numbers share a Greatest Common Divisor of 8 and a Least Common Multiple of 144. Find the second number if the first is 16.

Select your answer for: Two numbers share a Greatest Common Divisor of 8 and a Least Common Multiple of 144. Find the second number if the first is 16.
Show answer

Answer: C. 72

The product of two numbers always equals the product of their greatest common divisor and least common multiple. Multiplying the greatest common divisor of eight by the least common multiple of one forty four gives eleve...

Q5. Ascertain the HCF of 3/16, 5/12, 7/8__________?

Select your answer for: Ascertain the HCF of 3/16, 5/12, 7/8__________?
Show answer

Answer: C. 1/48

Finding the highest common factor of fractions requires applying the formula for numerators and denominators. Calculating the highest common factor of the numerators gives the top part of the result. Calculating the leas...

Q6. How many cubes with 2 dm edges can be fabricated from a one-meter cube?

Select your answer for: How many cubes with 2 dm edges can be fabricated from a one-meter cube?
Show answer

Answer: D. 125

A one-meter cube equals one thousand cubic decimeters in total volume space. A cube with two-decimeter edges possesses a volume of eight cubic decimeters. Dividing one thousand by eight yields one hundred twenty-five sma...

New!

Mock Test System is now available!

Prepare for your exam with interactive mock tests. Select your subjects, attempt 100 random MCQs against the clock, and see exactly where you stand.

Start Mock Test