Within an isothermal atmosphere, pressure varies by___________________?
Show answer Hide answer
Answer: C. varies in the same way as the density
Explanation
In an isothermal atmosphere, the temperature remains constant throughout varying elevations above sea level. Applying the ideal gas law under constant temperature causes pressure to depend solely on air density. Consequently, atmospheric pressure and air density decrease exponentially at the exact same proportional rate. Isothermal conditions assume perfect thermal equilibrium where ambient temperature does not vary with height. The barometric formula mathematically links altitude changes with exponential pressure and density decay. Standard atmospheric models approximate lower altitude layers using near-isothermal or constant lapse rates.
Aviation altimeters rely on atmospheric pressure profiles to estimate aircraft altitude during flight operations. Meteorological studies utilize pressure-density relationships to model upper-atmosphere wind and weather dynamics. Aerospace engineers account for atmospheric density gradients when calculating rocket staging and aerodynamic drag. Pressure decreases exponentially rather than linearly with elevation in standard planetary atmospheric models. Stating that pressure remains constant with elevation contradicts basic barometric and hydrostatic principles. Unpredictable atmospheric pressure ignores the precise mathematical laws governing isothermal gas columns.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Approximate brake horsepower specific fuel consumption for diesel engines is___________________?
Show answer Hide answer
Answer: B. 0.2 kg
Typical specific fuel consumption for a modern diesel engine is roughly 0.2 kg per horsepower. This low fuel consumption rate demonstrates the high thermal efficiency of compression-ignition engines. Brake horsepower spe...
Q2. A convex liquid meniscus indicates that___________________?
Show answer Hide answer
Answer: C. cohesion pressure is increased
A convex meniscus forms when cohesive forces among liquid molecules exceed adhesive forces with container walls. Stronger internal molecular attraction pulls the liquid surface inward, increasing internal cohesion pressu...
Q3. In a steam dryness fraction test, 1.2 kg of water separated in 15 minutes while 4.8 kg of steam passed through; the dryness fraction is__________________?
Show answer Hide answer
Answer: D. 80%
Dryness fraction is the mass ratio of dry steam to the total mass of the steam-water mixture. The total mass of the mixture is the sum of dry steam mass and separated water mass. Dividing 4.8 kg of dry steam by the total...
Q4. A throttling process is characterized by_________________?
Show answer Hide answer
Answer: E. none of the above
A throttling process is isenthalpic and involves no external work or significant heat transfer. Internal energy for ideal gases remains constant during this steady flow restriction process. Because none of the listed con...
Q5. Given liquid specific weight w and depth k from the surface, pressure intensity at that point equals________________?
Show answer Hide answer
Answer: B. wh
Hydrostatic pressure intensity equals the product of fluid specific weight and vertical depth. Multiplying specific weight by depth accounts for the weight of the liquid column above. Dimensional analysis confirms that f...
Q6. Forced-circulation boilers are characterized by__________________?
Show answer Hide answer
Answer: D. water is converted into steam in one pass without any recirculation
Forced-circulation boilers use pumps to ensure continuous flow, but once-through boilers vaporize water in a single pass without recirculation.