Skip to main content
Sarkari MCQs Government Exam Question Bank
Menu
Question no. 57461

Forced-circulation boilers are characterized by__________________?

Select your answer for: Forced-circulation boilers are characterized by__________________?
Show answer

Answer: D. water is converted into steam in one pass without any recirculation

Explanation

Forced-circulation boilers use pumps to ensure continuous flow, but once-through boilers vaporize water in a single pass without recirculation.

Subject
Engineering
Topic
—
Difficulty
medium

Related questions

Q1. Within an isothermal atmosphere, pressure varies by___________________?

Select your answer for: Within an isothermal atmosphere, pressure varies by___________________?
Show answer

Answer: C. varies in the same way as the density

In an isothermal atmosphere, the temperature remains constant throughout varying elevations above sea level. Applying the ideal gas law under constant temperature causes pressure to depend solely on air density. Conseque...

Q2. For nearly dry steam samples, dryness fraction is most accurately evaluated using___________________?

Select your answer for: For nearly dry steam samples, dryness fraction is most accurately evaluated using___________________?
Show answer

Answer: A. throttling calorimeter

A throttling calorimeter measures the dryness fraction of nearly dry steam. Expanding steam to a lower pressure moves it into the superheated region. Pressure and temperature measurements calculate the exact initial stea...

Q3. A throttling process is characterized by_________________?

Select your answer for: A throttling process is characterized by_________________?
Show answer

Answer: E. none of the above

A throttling process is isenthalpic and involves no external work or significant heat transfer. Internal energy for ideal gases remains constant during this steady flow restriction process. Because none of the listed con...

Q4. For a submerged body, the center of pressure is located__________________?

Select your answer for: For a submerged body, the center of pressure is located__________________?
Show answer

Answer: C. below be centre of gravity

Hydrostatic pressure increases linearly with vertical depth beneath the free surface of any stationary liquid. Because deeper sections experience greater forces, the resultant force vector shifts downward from the geomet...

Q5. Carburetor fuel jet tips are positioned relative to float chamber levels at_________________?

Select your answer for: Carburetor fuel jet tips are positioned relative to float chamber levels at_________________?
Show answer

Answer: B. slightly higher level

Carburetor fuel jet discharge orifices are positioned slightly above the liquid fuel level in the float chamber. This slight elevation prevents gravity-fed fuel from spilling or leaking when the vehicle is stationary. En...

Q6. Under compression, a brittle material prism fails by________________?

Select your answer for: Under compression, a brittle material prism fails by________________?
Show answer

Answer: A. by forming a bulge (l>) by shearing along oblique plane

Brittle materials under compression fail by shearing along an oblique plane. Unlike ductile metals, brittle prisms shatter or crack along diagonal slip lines. Compressive stress exceeds the shear strength along specific...

New!

Mock Test System is now available!

Prepare for your exam with interactive mock tests. Select your subjects, attempt 100 random MCQs against the clock, and see exactly where you stand.

Start Mock Test