The ratio representing static pressure rise across rotor blading relative to total stage pressure rise is termed__________________?
Show answer Hide answer
Answer: C. degree of reaction
Explanation
The degree of reaction defines the exact fraction of static pressure rise that occurs across the rotating blade row. Comparing rotor static pressure rise to the total stage pressure rise quantifies how work is shared between rotors and stators. Reaction stages utilize both aerodynamic turning and static pressure drop to accelerate and compress working fluids. Axial compressor stages combine rotating blades and stationary stators, each contributing to total pressure staging. A fifty percent reaction stage divides the static enthalpy drop equally between the rotor and stator blade rows. Reaction formulas help aerodynamicists design blade camber angles and velocity triangles for optimal efficiency.
Pressure ratio measures overall outlet-to-inlet pressure performance rather than the static pressure split within a stage. Pressure coefficient is a dimensionless parameter used to evaluate stage pressure rise relative to rotor blade speed. Slip factor accounts for fluid deviation angles in centrifugal impellers rather than static pressure rise distribution.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. The ratio comparing isentropic work input to Euler work is known as_____________________?
Show answer Hide answer
Answer: A. pressure coefficient
The pressure coefficient compares real pressure gains against ideal theoretical work. It normalizes compressor performance relative to Euler velocity vector calculations. Fluid dynamic losses are quantified using this st...
Q2. The specific weight-to-horsepower ratio comparing gas turbines to internal combustion engines typically falls around_______________________?
Show answer Hide answer
Answer: E. 1 : 6
Gas turbines offer a much higher power-to-weight ratio than traditional reciprocating engines, often achieving ratios around one to six. The continuous combustion process in gas turbines eliminates heavy reciprocating co...
Q3. The work output per cycle divided by the displacement volume in a compressor is termed ______________?
Show answer Hide answer
Answer: D. mean effective pressure
Mean effective pressure is defined as the work output per cycle divided by engine displacement volume. This theoretical parameter allows engineers to compare engines of different sizes on a standardized basis. Higher mea...
Q4. Aeronautical gas turbine components are predominantly manufactured using__________________?
Show answer Hide answer
Answer: D. Timken, Haste and Inconel allpys
Superalloys like Timken, Hastelloy, and Inconel maintain exceptional structural strength at extremely high temperatures. Aeronautical gas turbines require materials that resist both severe thermal stress and destructive...
Q5. How does the takeoff and climb power available from a turbojet compare to a reciprocating engine___________________?
Show answer Hide answer
Answer: A. less
Turbojet thrust depends on exhaust gas velocity acceleration during forward motion. At static takeoff conditions, turbojet thrust power output is relatively low. Reciprocating engines deliver high propeller thrust effici...
Q6. Compressor volumetric efficiency responds to rising compression ratios by___________________?
Show answer Hide answer
Answer: B. decrease
As the compression ratio increases in a compressor with clearance volume, the re-expansion of trapped high-pressure gas reduces the effective volume of incoming air, thereby decreasing volumetric efficiency. Higher press...