Aeronautical gas turbine components are predominantly manufactured using__________________?
Show answer Hide answer
Answer: D. Timken, Haste and Inconel allpys
Explanation
Superalloys like Timken, Hastelloy, and Inconel maintain exceptional structural strength at extremely high temperatures. Aeronautical gas turbines require materials that resist both severe thermal stress and destructive oxidation processes. These specialized nickel and cobalt based alloys outperform standard steels in punishing turbine environments. Aeronautical gas turbines operate in extreme thermal environments where conventional metals would rapidly lose structural integrity. Superalloys are advanced metallic materials designed to withstand temperatures exceeding eighty percent of their melting point. Combustion chambers and turbine blades endure massive centrifugal loads alongside continuous high-temperature gas exposure.
Aircraft engine reliability depends heavily on the durability of superalloy components in the hot turbine section. Metallurgical advancements in materials like Inconel have directly enabled higher thrust-to-weight ratios in modern aviation. Manufacturing these complex superalloys requires specialized casting and machining techniques to ensure zero internal defects. Stainless steel lacks the high-temperature creep resistance required for modern aeronautical turbine blades. High alloy steels soften significantly under the continuous thermal loads experienced inside jet engine combustion sections. Titanium is widely used in cooler compressor stages but cannot withstand the extreme temperatures of turbine sections.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. The work output per cycle divided by the displacement volume in a compressor is termed ______________?
Show answer Hide answer
Answer: D. mean effective pressure
Mean effective pressure is defined as the work output per cycle divided by engine displacement volume. This theoretical parameter allows engineers to compare engines of different sizes on a standardized basis. Higher mea...
Q2. The proportion of isentropic work to Euler work input is designated as _____________________?
Show answer Hide answer
Answer: D. pressure coefficient
The pressure coefficient relates actual pressure development to the ideal energy imparted by the impeller. This dimensionless parameter quantifies how effectively a centrifugal compressor converts mechanical shaft work i...
Q3. The ratio representing static pressure rise across rotor blading relative to total stage pressure rise is termed__________________?
Show answer Hide answer
Answer: C. degree of reaction
The degree of reaction defines the exact fraction of static pressure rise that occurs across the rotating blade row. Comparing rotor static pressure rise to the total stage pressure rise quantifies how work is shared bet...
Q4. Compressor volumetric efficiency responds to rising compression ratios by___________________?
Show answer Hide answer
Answer: B. decrease
As the compression ratio increases in a compressor with clearance volume, the re-expansion of trapped high-pressure gas reduces the effective volume of incoming air, thereby decreasing volumetric efficiency. Higher press...
Q5. How do pressure ratios compare between open-cycle and closed-cycle gas turbines of identical horsepower_______________?
Show answer Hide answer
Answer: A. low
Closed-cycle gas turbines operate at higher pressures overall compared to open-cycle systems. Open-cycle gas turbines typically utilize lower pressure ratios for equivalent power output requirements. Density control in c...
Q6. Compressor volumetric efficiency computations are referenced against conditions at__________________?
Show answer Hide answer
Answer: B. volume of air inhaled at N.T.P. conditions
Compressor volumetric efficiency is standardly evaluated by referencing the volume of air inhaled against N.T.P. Normal Temperature and Pressure provide a universal baseline to compare compressor delivery rates consisten...