Surging instabilities in centrifugal compressor systems depend upon___________________?
Show answer Hide answer
Answer: D. stagnation pressure at the outlet
Explanation
Surge in centrifugal compressors is an unstable aerodynamic phenomenon triggered by mismatched outlet stagnation pressures. When system downstream pressure exceeds compressor delivery pressure capability, reverse flow occurs violently. Changes in load and stagnation pressure at the outlet destabilize the pressure ratio and mass flow balance. Compressor surge causes severe vibration, loud roaring noises, and rapid temperature spikes that can damage impellers. Stagnation pressure represents the static pressure plus the dynamic pressure of the fluid brought to a complete stop. Operating lines on compressor performance maps feature a distinct surge limit boundary separating stable and unstable zones.
Mass flow rate alone does not dictate surge without considering outlet stagnation pressure and system resistance curves. Pressure ratio is a contributing metric but must be paired with outlet stagnation conditions to define the surge line. Load changes trigger instability only when they alter the outlet stagnation pressure relative to the compressor capability.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Peak compression ratios for single-stage axial flow compressors in practice typically reach orders of________________?
Show answer Hide answer
Answer: A. 1 : 1.2
Axial flow compressor blades have strict aerodynamic turning limitations per stage. Excessive pressure gradients across a single stage induce flow separation and stall. Single-stage axial pressure ratios are therefore ke...
Q2. Rotary compressors find their optimal application in_____________________?
Show answer Hide answer
Answer: B. small quantity of air at high pressure
Rotary positive-displacement compressors are well suited for delivering smaller volumes at higher pressures efficiently. The internal design of rotary screw units minimizes leakage clearance gaps when operating at elevat...
Q3. Ideal thermal efficiency of a simple gas turbine cycle is a function of________________?
Show answer Hide answer
Answer: A. pressure ratio
The ideal thermal efficiency of a simple Brayton gas turbine cycle is a function of pressure ratio. Higher pressure ratios expand the temperature limits across the ideal thermodynamic cycle loop. Thermodynamic equations...
Q4. Pressure ratios across gas turbine systems are typically on the order of__________________?
Show answer Hide answer
Answer: C. 61: 1
Overall pressure ratios across industrial gas turbines commonly reach values around 12:1 or higher, though options vary.
Q5. The ratio comparing isentropic work input to Euler work is known as_____________________?
Show answer Hide answer
Answer: A. pressure coefficient
The pressure coefficient compares real pressure gains against ideal theoretical work. It normalizes compressor performance relative to Euler velocity vector calculations. Fluid dynamic losses are quantified using this st...
Q6. The specific weight-to-horsepower ratio comparing gas turbines to internal combustion engines typically falls around_______________________?
Show answer Hide answer
Answer: E. 1 : 6
Gas turbines offer a much higher power-to-weight ratio than traditional reciprocating engines, often achieving ratios around one to six. The continuous combustion process in gas turbines eliminates heavy reciprocating co...