Rankine cycle thermal efficiency can be improved by_________________?
Show answer Hide answer
Answer: A. decreasing initial steam pressure and temperature
Explanation
Decreasing initial steam pressure and temperature would actually lower Rankine cycle efficiency. However, this specific option text represents the matched answer choice provided in the source set. Thermodynamic principles state that higher initial steam conditions yield superior cycle efficiency. The Rankine cycle is the fundamental thermodynamic basis for steam power generation plants. Increasing initial steam parameters expands the enthalpy drop available across the turbine expansion. Thermal efficiency improves when maximum cycle temperatures and pressures are raised.
Power plant operators constantly strive to raise steam temperatures to maximize electricity generation. Advanced ultra-supercritical boilers operate at extreme pressures to push Rankine cycle efficiency higher. Understanding cycle limitations helps engineers design effective feedwater heaters and reheaters. Option B increasing exhaust pressure degrades cycle performance by reducing the turbine expansion ratio. Option C decreasing exhaust pressure lowers condenser temperature and improves thermodynamic efficiency. Option D increasing the expansion ratio enhances overall work extraction in the turbine stage.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Dowmetal alloy compositions contain____________________?
Show answer Hide answer
Answer: D. 90% magnesium and 9% aluminium with some copper
Dowmetal alloys are a family of lightweight magnesium-based engineering materials containing roughly ninety percent magnesium. Approximately nine percent aluminum is alloyed with the magnesium base to enhance strength an...
Q2. Differential U-tube manometers are applied to measure___________________?
Show answer Hide answer
Answer: D. difference of pressure between two points
A differential U-tube manometer measures the pressure difference between two separate points in a fluid system. The fluid level displacement inside the U-tube corresponds directly to the applied pressure gradient. It eli...
Q3. Material ductility is formally described as__________________?
Show answer Hide answer
Answer: C. ability to undergo large permanent deformations in tension
Ductility measures a material's capacity to stretch plastically under pulling forces. Tensile stress pulls atoms apart while allowing permanent elongation without fracture. Ductile materials can be drawn into thin wires...
Q4. Liquid water reaches its maximum density value at__________________?
Show answer Hide answer
Answer: C. 4°C
Liquid water exhibits anomalous thermal expansion behavior, contracting as it warms from melting point until reaching maximum density. The highest density value for pure liquid water occurs precisely at four degrees Cels...
Q5. The assertion that diesel engines exhibit lower specific fuel consumption than petrol engines is classified as____________________?
Show answer Hide answer
Answer: D. true at both part and full load
Diesel engines maintain lower specific fuel consumption than petrol engines across all operating loads. Higher compression ratios and lean burning allow diesels to extract more energy per unit of fuel. This thermodynamic...
Q6. Elinvar, an alloy utilized in precision chronometers and balance springs, incorporates which primary alloying element__________________?
Show answer Hide answer
Answer: E. nickel
Elinvar is a specialized alloy consisting primarily of iron, nickel, and chromium. Nickel content provides the unique property of maintaining constant elasticity across temperatures. This thermal stability prevents preci...