Skip to main content
Sarkari MCQs Government Exam Question Bank
Menu
Question no. 56911

Point out the false statement from the choices?

Select your answer for: Point out the false statement from the choices?
Show answer

Answer: A. gas turbine is a self-starting unit

Explanation

Gas turbines cannot initiate their own compression cycle without external power assistance. An electric starter motor or auxiliary power unit must spool up the compressor first. Fuel ignition can only occur once sufficient airflow and pressure are established. Compressors require external torque input before the turbine generates enough power to sustain them. Self-starting reciprocating engines use internal combustion strokes directly from rest. Auxiliary power units provide the initial pneumatic or electrical energy for large jets.

Commercial aircraft pilots must follow strict startup sequences using external ground power. Power plant operators ensure starting motors are fully functional before plant activation. Failing to spool the compressor properly leads to hot starts and engine damage. Gas turbines require very little cooling water compared to traditional steam plants. Exhaust losses are indeed high because of the massive continuous mass flow rate. Gas turbines can be started and stopped quickly making them ideal for peak loads.

Subject
Engineering
Topic
—
Difficulty
medium

Related questions

Q1. Open-circuit gas turbine systems operate according to___________________?

Select your answer for: Open-circuit gas turbine systems operate according to___________________?
Show answer

Answer: A. Brayton or Atkinson cycle

Open-circuit gas turbine systems operate according to the idealized Brayton thermodynamic power cycle. Air is continuously drawn from the atmosphere, compressed, heated via combustion, and expanded through turbines. The...

Q2. Select the correct statement among the options provided?

Select your answer for: Select the correct statement among the options provided?
Show answer

Answer: B. gas turhine uses high air-fuel ratio to reduce outgoing temperature

Combustion of fuel in air produces extremely high flame temperatures that can melt metal turbine components. Gas turbines deliberately ingest and mix high air-fuel ratios to dilute the hot combustion gas products. This m...

Q3. Maintaining a clearance volume in operational reciprocating compressors is necessary because__________________?

Select your answer for: Maintaining a clearance volume in operational reciprocating compressors is necessary because__________________?
Show answer

Answer: E. to provide cushioning effect and also to avoid mechanical bang of piston with cylinder head

Clearance volume leaves a small physical gap between the piston top and cylinder head at top dead center. Trapped gas in the clearance volume expands during the suction stroke, acting as a pneumatic cushion for the pisto...

Q4. How do mechanical efficiencies of gas turbines compare against conventional internal combustion engines____________________?

Select your answer for: How do mechanical efficiencies of gas turbines compare against conventional internal combustion engines____________________?
Show answer

Answer: A. higher

Gas turbines have fewer reciprocating parts and continuous flow, resulting in higher mechanical efficiencies. Rotary motion eliminates the mechanical friction losses associated with piston side-thrust and connecting rods...

Q5. Identify the erroneous statement among the choices ?

Select your answer for: Identify the erroneous statement among the choices ?
Show answer

Answer: A. pulsojet requires no ambient air for propulsion

Pulsejets are air-breathing jet engines that rely on periodic combustion intake of fresh surrounding air. Like all air-breathing engines, they require ambient atmospheric oxygen to sustain fuel combustion and propulsion....

Q6. Industrial producer gas is manufactured via_____________________?

Select your answer for: Industrial producer gas is manufactured via_____________________?
Show answer

Answer: D. partial combustion of coal, coke, anthracite coal or charcoal in a mixed air steam blast

Industrial producer gas is generated by passing a mixed blast of air and steam through glowing carbonaceous fuel beds. Partial combustion reactions produce a mixture containing carbon monoxide, hydrogen, nitrogen, and sm...

New!

Mock Test System is now available!

Prepare for your exam with interactive mock tests. Select your subjects, attempt 100 random MCQs against the clock, and see exactly where you stand.

Start Mock Test