Maintaining a clearance volume in operational reciprocating compressors is necessary because__________________?
Show answer Hide answer
Answer: E. to provide cushioning effect and also to avoid mechanical bang of piston with cylinder head
Explanation
Clearance volume leaves a small physical gap between the piston top and cylinder head at top dead center. Trapped gas in the clearance volume expands during the suction stroke, acting as a pneumatic cushion for the piston. Providing this space prevents destructive mechanical collisions between the reciprocating piston and the stationary cylinder head. Reciprocating compressors must accommodate manufacturing tolerances and thermal expansion without component interference. The clearance volume traps high-pressure discharge gas that must re-expand before new suction air can enter. Mechanical cushioning reduces stress loads on connecting rods, wrist pins, and crankshaft bearings during reversal points.
Accommodating valves is important but secondary to the primary mechanical protection and cushioning functions provided. Providing a cushioning effect alone omits the critical safety requirement of preventing piston-head mechanical impacts. Attaining high volumetric efficiency requires minimizing clearance volume rather than maintaining it for efficiency purposes.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. In jet engines, where are the products of combustion directed after flowing through the gas turbine_______________?
Show answer Hide answer
Answer: C. discharge nozzle
Combustion gases expand through the turbine section to extract mechanical compressor work. The remaining high-pressure exhaust is directed into a converging discharge nozzle. Accelerating these gases through the nozzle c...
Q2. Identify the accurate technical statement?
Show answer Hide answer
Answer: E. thrust in turbo-jet is produced by nozzle exit gases
Thrust in a turbojet engine is produced by expanding hot gases through a rear nozzle. Newtonian reaction forces propel the aircraft forward as high-velocity gases escape backward. Exhaust gas momentum creates the forward...
Q3. Open-circuit gas turbine systems operate according to___________________?
Show answer Hide answer
Answer: A. Brayton or Atkinson cycle
Open-circuit gas turbine systems operate according to the idealized Brayton thermodynamic power cycle. Air is continuously drawn from the atmosphere, compressed, heated via combustion, and expanded through turbines. The...
Q4. Point out the false statement from the choices?
Show answer Hide answer
Answer: A. gas turbine is a self-starting unit
Gas turbines cannot initiate their own compression cycle without external power assistance. An electric starter motor or auxiliary power unit must spool up the compressor first. Fuel ignition can only occur once sufficie...
Q5. Deploying multi-stage reciprocating compressors becomes mandatory when discharge pressures exceed____________________?
Show answer Hide answer
Answer: A. 2 kg/cm2
Multi-stage reciprocating compressors become necessary when discharge pressures exceed limits. High compression ratios generate excessive discharge temperatures causing lubricant breakdown. Staging compression with inter...
Q6. How do mechanical efficiencies of gas turbines compare against conventional internal combustion engines____________________?
Show answer Hide answer
Answer: A. higher
Gas turbines have fewer reciprocating parts and continuous flow, resulting in higher mechanical efficiencies. Rotary motion eliminates the mechanical friction losses associated with piston side-thrust and connecting rods...