Per fan laws, at a constant mass flow of gas or air, speed, capacity, and pressure vary________________?
Show answer Hide answer
Answer: C. inversely as density
Explanation
Fan laws dictate that at constant mass flow, capacity and pressure vary inversely with density. Changes in ambient air density require speed adjustments to maintain constant mass flow rates. Mathematical fan scaling equations confirm this inverse density performance relationship. Centrifugal and axial fans obey strict affinity laws relating speed, flow, and pressure. Gas density varies with temperature, barometric pressure, and operational altitude changes. Maintaining constant mass flow is critical for industrial combustion and ventilation systems.
HVAC engineers adjust fan speeds when operating at high altitudes with lower air density. Industrial ventilation design requires accounting for seasonal temperature and pressure fluctuations. Fan performance curves help operators maintain required airflow under varying atmospheric conditions. Option A incorrectly suggests direct proportionality with gas or air density. Option B uses a square root relationship which violates standard fan affinity laws. Option D applies squared density scaling which does not match constant mass flow physics.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Per fan laws, maintaining constant speed and capacity causes pressure and power to vary_____________________?
Show answer Hide answer
Answer: A. directly as the air or gas density
Fan laws state that for a constant fan speed and volumetric capacity, pressure and power vary directly with density. If the inlet gas density increases, the pressure developed and power required increase proportionally b...
Q2. Heavy-duty leaf and coil springs typically contain carbon in this range________________?
Show answer Hide answer
Answer: D. 1.0%
High carbon spring steels require around one percent carbon to achieve necessary elastic resilience. This carbon concentration enables proper heat treatment and quenching to form strong martensite. Option D accurately re...
Q3. High carbon steel contains carbon within what percentage_________________?
Show answer Hide answer
Answer: D. 0.8 to 1.5%
High carbon steels contain carbon concentrations ranging from 0.8 percent to 1.5 percent by weight. This higher carbon content enables extensive martensitic transformation during heat treatment, producing extreme hardnes...
Q4. Heating wet steam isothermally equates to heating at constant_________________?
Show answer Hide answer
Answer: B. pressure
For a pure substance inside the wet steam saturation region, temperature and pressure are strictly interdependent. Holding the saturation temperature constant during a phase change automatically maintains constant satura...
Q5. A turbine pump essentially consists of a centrifugal pump outfitted with_________________?
Show answer Hide answer
Answer: C. vaned diffusion casing
A turbine pump combines a centrifugal impeller with stationary diffuser vanes surrounding it. The vaned casing efficiently converts high kinetic energy exiting the impeller into pressure energy. Option C correctly identi...
Q6. Per fan laws, fixed-wheel-diameter fans exhibit power consumption that varies_______________?
Show answer Hide answer
Answer: C. cube of fan speed
Fan laws dictate that for a fixed wheel diameter, power consumption varies directly as the cube of the fan speed. Doubling the rotational speed of a centrifugal fan increases the required motor power output by a factor o...